Question Troubleshooting GC+ 2.0

Aurelio

ᕕ( ᐛ )ᕗ
Staff member
.
.
.
.
.
Joined
Mar 3, 2016
Messages
2,219
Likes
2,937
Portables
2
Probably the pic16 was not programmed properly or fried,which was most problems i met when gc+ did not function
All the GC+s we sell on the store are tested to make sure they fully work before being shipped
 

xsping

.
Joined
Dec 9, 2018
Messages
154
Likes
50
I just took a spare GameCube controller cable I had and wired it to the GC+
check the resistor array on the wii board, if it shows not 10k, Try add 10k resistor between data and 3.3v,sorry for bump old thread
 

Aurelio

ᕕ( ᐛ )ᕗ
Staff member
.
.
.
.
.
Joined
Mar 3, 2016
Messages
2,219
Likes
2,937
Portables
2
check the resistor array on the wii board, if it shows not 10k, Try add 10k resistor between data and 3.3v,sorry for bump old thread
The resistor array on the Wii is 700 Ohm, not 10k
 
Top