Question Trimmed Board getting to Priiloader

Joined
Sep 7, 2017
Messages
70
Likes
2
The usual way to get to priiloader if it isnt set to auto boot into it, is to hold power and reset btn, but they arent present on trimmed motherboard. Are there like some pins that also trigger the function of reset button?
Off topic
Will these regulators work for the trimmed console?:https://www.ebay.com/itm/10X-MP1484EN-DC-DC-Buck-Converter-Step-down-Regulator-Module-4-75V-23V-to-1V-17V/202113299335
or these:https://www.ebay.com/itm/5PCS-Mini-360-Step-Down-Module-DC-DC-Buck-Converter-4-75V-23V-to-1V-17V/391778145106
 
Last edited:

GingerOfOz

no wario
Staff member
.
.
2020 2nd Place Winner
2022 3rd Place Winner
Joined
Dec 16, 2016
Messages
1,122
Likes
2,709
Location
The Oregon Wildlands
Portables
just so many i am so cool
I'd recommend looking at the trimming guide again because reset is outlined there in the MX chip section.

Also, no and no on these voltage regulators . They will not work.
 
Last edited:
Joined
Sep 7, 2017
Messages
70
Likes
2
I'd recommend looking at the trimming guide again because reset is outlined there in the MX chip section.

Also, no and no on these voltage regulators . They will not work.
Ok for the reset iam sorry i missed it but can i ask why it wouldnt work?It says it can deliver from 4.75 - 23V input a 1-17V output.
I dont wanna offense you, that you are not right but i just want to teach myself.
 

cheese

the tallest memer in town
Staff member
.
.
.
Joined
Mar 2, 2016
Messages
2,759
Likes
2,430
Location
Florida
Ok for the reset iam sorry i missed it but can i ask why it wouldnt work?It says it can deliver from 4.75 - 23V input a 1-17V output.
I dont wanna offense you, that you are not right but i just want to teach myself.
Those don't work because the parts aren't actually able to do what they say they can (unless you consider the part melting is "working correctly")
 

cheese

the tallest memer in town
Staff member
.
.
.
Joined
Mar 2, 2016
Messages
2,759
Likes
2,430
Location
Florida
Top