- Joined
- Jun 28, 2017
- Messages
- 70
- Likes
- 114
Just finished up the video and edited the first post to show that the project is done! Good luck to everyone else!
Worklog [2022 Contest Entry] SP Liite V2
- Thread starter Senor Avocado
- Start date
AFE123
.
- Joined
- Mar 2, 2020
- Messages
- 119
- Likes
- 63
- Portables
- 1ish.
Really good build! Just wondering, how're the voltage regulators overall? Also, what's the purpose of the resistor and diode on the regs? Is it for controlling the voltage on the regs?
Last edited:
- Joined
- Jun 28, 2017
- Messages
- 70
- Likes
- 114
They are definitely not the best, but they were very cost effective and reliable enough. they are a lot shorter than the wah regs too so it made it easier to fit in the space i had allocated.
The resistor sets the voltage of the regulator, and the diode was already present on the board (maybe to help with reverse voltage?) but i had to relocate it to make room for the hole i drilled through the board to secure it with a screw to the heatsink. last time i tried epoxying the regulator and it didn't work too well
The resistor sets the voltage of the regulator, and the diode was already present on the board (maybe to help with reverse voltage?) but i had to relocate it to make room for the hole i drilled through the board to secure it with a screw to the heatsink. last time i tried epoxying the regulator and it didn't work too well