screen sometimes works?

Joined
Apr 26, 2020
Messages
10
Likes
0
Hey all, I know most people are probably done with their g-boys already, but I took a break because school got super busy. So I'm coming back and trying to figure out where I went wrong when I stopped. I was on step 13 and wiring up the wii, and I wired up the controller as well, but the screen will not stay on long enough for me to test the buttons. Sometimes it stays on for a couple seconds and I can navigate the menu, but usually it just flashes and then stays off on startup.
Any help or advice would be greatly appreciated!
messages_0 (7).jpegmessages_0 (6).jpegmessages_0 (5).jpegmessages_0 (4).jpegmessages_0 (3).jpegmessages_0 (2).jpegmessages_0 (1).jpegmessages_0.jpeg
 
Joined
Apr 12, 2020
Messages
207
Likes
235
Only suggestion I have would be to make sure the batteries are charged up all the way :). Good luck! Glad your back at it with the G-Boy!
 
Joined
Jul 6, 2020
Messages
1
Likes
0
Check to see if the display is in the right output, use the control board to change it to composite. Also try connecting something else to the display with composite to see if it works.
 
Top