Screen Issues - Need Input

[gimalgentry]

So I got VGA working and it looks almost the same as the composite. I have attached an image with 4 pictures from the screen showing a bleeding effect. I would like to note that this exact same effect was present with composite connected to the LCD. However I made a composite adapter and output the image to a 13inch composite lcd tv and it looked perfect. nice and bright with no color bleed. Thoughts?

 

[Gman]

Try to access the screen OSD with the screen pcb and turn down the level of the Green color. Also are you using shielded/twisted wire? (you should be for clear interference video)

 

[gimalgentry]

Try to access the screen OSD with the screen pcb and turn down the level of the Green color. Also are you using shielded/twisted wire? (you should be for clear interference video)

I'm using twisted 34 AWG magnet wire just like in the guide. Used my drill to get a nice long piece of twisted made.
Turning down the green after I took the pics did help a lot with the colors.

I will try redoing them with a tighter twist on them. Try to get closer to what is in the guide.