Solved RVL PMS 3v3

Joined
Nov 1, 2020
Messages
40
Likes
18
Bought a partially built gboy kit. The RVL pms 3v3 is not working. What should I check on the board? It was working then stopped. Nothing smoked or anything. Just stopped putting 3v3 out.
 

Gman

RTFDS
Staff member
.
.
.
.
.
Joined
Feb 25, 2016
Messages
1,435
Likes
2,873
You should post pictures otherwise we have very little to work off of
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
3,776
Likes
2,982
Location
Banana Bender Land, Australia
Portables
6
Well, I'd start with getting some IPA and cleaning the thing. There's a lot of excess flux and dirt there, could be causing a phantom short. If not, at least you'll be able to see the joints clearly.
 
Joined
Nov 1, 2020
Messages
40
Likes
18
Well, I'd start with getting some IPA and cleaning the thing. There's a lot of excess flux and dirt there, could be causing a phantom short. If not, at least you'll be able to see the joints clearly.
Yeah I'm going to pull it out. Probably should of when I got it.
 
Joined
Nov 1, 2020
Messages
40
Likes
18
Used desoldering wick, cleaned it up, soldered all the pads, reattached everything and all is fine.
 
Top