- Joined
- Aug 2, 2016
- Messages
- 294
- Likes
- 144
Here's an old board I tried fiddling with a couple years back when I was told that wiis became a popular modding console, I tried it a couple times, but kept failing because I wasn't properly testing it with the right power source. So after looking back at this now I thought I'd give it a try, I think my trim looks fine so who knows maybe it works. I ordered a power mii lite pcb which hasn't arrived yet (still not sure when it will) so I went ahead and ordered some ti regs for now which should arrive this up coming Monday
They're wahs and was able to get 4 for $30.
However, I was going over the resistors that I needed and was wondering how close to the needed resistance could I be? Like for the 3.3v line it says it needs 1.89k
I assume I could just use a 1.8k resistor?
But for 1v it needs 87.2k so I'd have to add 3 together since I assume something like 82k wouldn't work?
If I have to add a few resistors together for most of them I'll do it, but if I can get away with a little resistance than I wouldn't mind that. I honestly wouldn't mind testing the two boards I cut, one could probably be a home console and the other a portable? just have to make sure they work.