PS2GO! finished! - Brazil

Joined
May 8, 2017
Messages
71
Likes
204
Friends, I have been working on my second portable Playstation 2 for some time, due to family problems, I didn't have much time to post the job updates on the forum,
because all the time I had left I dedicated to the project,
forgiving people, I don't speak english, I use a translator...


The project counts:
* 7 "HDMI screen
* Pound Converter (RGB to HDMI)
* 4x 18650 Batteries (2200 mha)
* Case Printed in 3d
* Red Load Plate
* Headphone output
* 64GB internal memory (pendrive)

Here are some pictures:


*Connecting the HDMI port of the "POND" converter with the display board:
20200309_024233.jpg


*Screen board and converter together:
20200309_124541.jpg


20200309_124527.jpg


*It worked!
20200309_132130.jpg


*Printed case, unfortunately it was necessary to share it due to the limitation of the bed size of my 3D printer...
20200207_132940.jpg


* Attached parts:
20200207_132957.jpg


* Case next to the "PS2" board that had very subtle cuts, but extremely important to fit inside the case ..
318f3d36-4369-4c87-8dd5-33241f84f658.jpg


* Painted case:
20200326_015104.jpg


20200327_231336.jpg


Here I have almost everything assembled, I used a pth08080 as a 5v regulator for my PS2 card, and I used to power everything 5v inside the console, these regulators are very good!
it worked perfectly and didn't even get hot ...
It is also possible to see the sound amplifier, battery charge card and the USB slot that accommodates the screwdriver screwed in the lower left corner ...
20200327_231348.jpg


20200326_015124.jpg


*Here appears the generic control board that I used, I cut it and reconnected all the points to the buttons ...
20200328_150755.jpg


Ready!
20200329_221154.jpg


20200329_221541.jpg


20200329_221604.jpg



Here is a video I made, in it I present the console and test some games! I thank everyone! Much of it I learned here with everyone, Thanks!

 

Attachments

Joined
Sep 27, 2016
Messages
404
Likes
864
Wow, very clean and can't even tell the case was printed in 2 pieces after you painted it! I've always wondered what the inside of the POUND cable looks like...
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
3,773
Likes
2,981
Location
Banana Bender Land, Australia
Portables
6
I worry that the converter needs a heatsink, but that's a really nice portable. Well done my dude.
 
Joined
May 8, 2017
Messages
71
Likes
204
Wow, very clean and can't even tell the case was printed in 2 pieces after you painted it! I've always wondered what the inside of the POUND cable looks like...
Thank you friend! Glad you liked it!

I worry that the converter needs a heatsink, but that's a really nice portable. Well done my dude.
Friend, the converter really heats up a little, but the cooler does a good job and cools it down well...
 

Attachments

Joined
Apr 6, 2020
Messages
90
Likes
238
Hello friend, I'm also Brazilian and I'm creating my portable PS2. Where did you buy your pth08080 regulator? I bought some on Aliexpress, I hope they arrive as expected.
 

Mith

.
Joined
Mar 7, 2020
Messages
9
Likes
2
Awesome dude, how can get the print file case from your project?
 

Jgame

.
Joined
Oct 11, 2020
Messages
1
Likes
0
Você colocou dois resistores no regulador de tensão isso e um cálculo que você fez para ter os 5v?
 
Top