My first 3d printed ps2 portable. I’ve been working on this design on and off since June, I’m a complete beginner on 3d printing/designing. This is not the final design, I did print a lot of individual pieces to make sure they fit and I did a full test print, I’m currently fixing some issues I had with it.
I had the hardest time with the shoulder buttons but thanks @Benge I finally figure out a solution that works for me, I also want to thank him for releasing his Ps vita models although I didn’t use them in this portable I did use his joy con models to help me with my standoffs.
SPECS
Advance trim
Gman pms
2- 3500mah 18650
usb c charge module
Micro sd port
PSP slim buttons
LCD I got from gman
size of portable
Length- 189.8mm
Width- 95.4mm
Thickness- 32.4mm
I had the hardest time with the shoulder buttons but thanks @Benge I finally figure out a solution that works for me, I also want to thank him for releasing his Ps vita models although I didn’t use them in this portable I did use his joy con models to help me with my standoffs.
SPECS
Advance trim
Gman pms
2- 3500mah 18650
usb c charge module
Micro sd port
PSP slim buttons
LCD I got from gman
size of portable
Length- 189.8mm
Width- 95.4mm
Thickness- 32.4mm