Question Ps2 controller relocation

Joined
Oct 25, 2022
Messages
10
Likes
0
CM221120-170143014~3.jpg
CM221120-164628011~2.jpg

Try to relocate ps2 controller port 1
Ack, clk , att ,cmd ,dat
GND and 3v i take from controller port 2
And when turn ps2 on the controller not functioning already check each point and solder was fine but still not working ..
 
Joined
Oct 25, 2022
Messages
10
Likes
0
The routing channel has no error but the controller can't be used.
Did you wire only controller? I have done this before when I only solder joysticks with not memory card the controller is not functioning but when i solder both its ok try solder both controller and memory card
 
Joined
Oct 25, 2022
Messages
10
Likes
0
Did you wire only controller? I have done this before when I only solder joysticks with not memory card the controller is not functioning but when i solder both its ok try solder both controller and memory card
Can i know what lcd will you use on this project cause im still finding one for now my option is 7inch raspberry pi with ps2 to hdmi converter and 480i support the picture is ok better than av and try what this videohttps://youtu.be/YU126mWxNB0
 
Top