Ps2 advance trim no signal

[mastegui]

“Hi, I tried the PS2 trim to see if I could create a portable console for myself, but I’m having some difficulties with the guide. I followed the instructions from several posts and I’m getting all the correct voltages, but there’s no signal on the screen. Maybe my board is dead, but I wanted to share some photos to see if someone can help me.” I can take more photos if needed thanks

 

[mastegui]

Update: I took more photos and redid the wiring using the same colors as in the guide. Same problem — I have all the correct voltages, but there's still no signal.

 

[Fly_5]

Hello, maybe I can help you. If you want, we can talk via Telegram or WhatsApp for more fluidity. Send me a private message and we'll talk. Best regards.

 

[mastegui]

Missing 100nf cap bottom right

 

[mastegui]

 

[Luigid]

it is on the ACC line and not AV, also you would not be able to solder the connector in its seat flush with the board, also it is not necessary for your problem, if you have another AV device you can confirm that the screen is working correctly

 

[mastegui]

I try with a home tv and it does not work i send my ps2 board to customledmods so he can get a look at it

 

[mastegui]

And the connector is made so that cap is there maybe its not a critical component but i still gonna put one back there i will update you guys if customledmods found the problem or i just start fresh with a new board

 

[Luigid]

you could also do the reverse test by trying the board you had with another AV device without buying a new one

 

[mastegui]

I could try that but all my stuff is at my workstation a my job so im updating on monday about it

 

[mastegui]

Update: So my screen board is working — I tried plugging in a camera with AV output and it worked, so the problem is with my PS2 motherboard.

 

[Customledmods]

after a couple hours i got it working.

 

[mastegui]

Legend in action

 

[Fly_5]

after a couple hours i got it working. View attachment 39189

where was the problem?

 

[Customledmods]

There was a couple shorts on the board, I trimmed it more also had to grab av out from this via and it worked.

 

[Fly_5]

good job .

 

[mastegui]

I will post a new thread when i get the board back and get all the part i need to start building the portable