Solved Problem after trimming board

[Nazeem Hussain]

Hi everyone,

I have a problem and need some help.

I trimmed my motherboard today and now my WASP fusion is acting weird.

I trimmed the motherboard slightly then tested it to see if it worked and it did. WASP was working great. I then trimmed it down a little more so it would fit in my case and now the WASP doesn't work. When the WASP is not plugged in the gamecube turns on and works, followed by the error message moments later for not having a disk drive. But when the WASP is plugged in there is no video to the TV....? Just a black screen and the gamecube remains on.

Board is a REV C btw, just did a slight cut around the edges.
I also sanded down the sides.

Please help!?

 

[cheese]

The only thought I have is make sure the ffc is seated properly.

 

[Nazeem Hussain]

I get the blue LED flash from the WASP so it is working but the video only comes up when the WASP isn't plugged in

 

[Nazeem Hussain]

The only thought I have is make sure the ffc is seated properly.

Managed to fix it. I re sanded all the edges and bought a can of compressed air and blew the entire motherboard to make sure there wasn't any metal shavings shorting it out.