Post your workstation!

Discussion in 'General Discussion' started by Mooper, Mar 21, 2016.

  1. Frog Puppet .

    Joined:
    Dec 8, 2016
    Messages:
    34
    Likes Received:
    33
    Thanks! It's always a work in progress.
     
    MiseriesChild and Ampz like this.
  2. MiseriesChild .

    Joined:
    Jul 25, 2016
    Messages:
    162
    Likes Received:
    120
    Location:
    US - Tallahassee, Fl
    Portables:
    3/4
    "Let me show you around. This is my lab table. This is my work stool and over there is my intergalactic spaceship. And here is where I keep assorted lengths of wire..." - Hubert J. Farnsworth
    2017-01-01 16.59.52.jpg

    2017-01-01 17.00.45.jpg 2017-01-01 17.02.58.jpg 2017-01-01 17.19.35.jpg 2017-01-01 17.20.32.jpg 2017-01-01 17.22.25.jpg 2017-01-01 17.22.46.jpg

    Unfortunately I don't have an intergalactic spaceship... unless you count my Start Trek models. :D

    My computer desk doubles as my "work from home" area but I use both back and forth. They are in a constant state of "Work in Progress" in the case of organization but they work pretty good for now. Since my music studio is full of equipment, (drums, guitar/amps, the MacPro w/interface, etc.) I'm setup in the bedroom for now so it can get kinda cramped, I hope to get some kind of garage workshop in the future but that will be awhile. :)
     
  3. JacksonS . . .

    Joined:
    Feb 17, 2016
    Messages:
    299
    Likes Received:
    538
    Location:
    Georgia, USA
    Portables:
    6
    I've got a great spot right in front of the circuit breakers. It's purely a workstation with no computers or anything, just a TV for testing stuff. This is the cleanest it's been in months.
    20170101_202527.jpg
     
    Miceeno, Gman and Shank like this.
  4. MiseriesChild .

    Joined:
    Jul 25, 2016
    Messages:
    162
    Likes Received:
    120
    Location:
    US - Tallahassee, Fl
    Portables:
    3/4
    Gotta say I love the organization and shelves/bins there @JacksonS that's what I'm shooting for.

    Really nice setups everyone!! Gotsta have somewhere nice to get some work done!! :)
     
    Last edited: Jan 2, 2017
    JacksonS and cheese like this.
  5. Bardicus .

    Joined:
    Dec 9, 2016
    Messages:
    45
    Likes Received:
    20
    Location:
    Denver
    A726FC23-3157-4E89-9BA2-ABA22A10171D.JPG 1848B31F-FDE6-4D86-95CA-1E767EEDB186.JPG IMG_0390.JPG
    I have...

    My office workstation - where all my non magic happens!!! :facepalm:

    My wife's workstation when I've been in my office for too long, at the outdoor pool.

    And my video game man cave, where I spend most hours playing these amazing things we all love. While my wife hangs at her workstation.

    Oh to be a nerd with a wife who just doesn't understand <3
     
    MiseriesChild and cheese like this.
  6. MiseriesChild .

    Joined:
    Jul 25, 2016
    Messages:
    162
    Likes Received:
    120
    Location:
    US - Tallahassee, Fl
    Portables:
    3/4
    The newest addition to my workstation and my first fully "finished" project!! I call it the "FrankenDell"... at least that's what it felt like while I was putting it together, lol!! It was a fun, useful and quick project that will hang on my wall so I can have a bigger screen for testing as I'm building different portables. It will also come in handy to hook up to my PC and throw schematics and such over so I don't have to keep moving back and forth from my PC desk to my work bench. :)

    Normal Old 15.4" Dell Laptop Screen:
    2017-01-17 00.06.05.jpg

    Add hot glue, a drill, some of my cats insulin syringe caps to use as standoffs, a $2 picture hanging kit and the "FrankenDell" is born. :)
    2017-01-17 00.05.34.jpg

    1280x800 resolution with onboard VGA, DVI, HDMI and Audio amp. I have the VGA run hooked up to a Composite to VGA converter box so I can test through the different stages of the building process. This will come in really handy while playing with my Wii... >:):awesome:

    Nothing really new to you guys I'm sure but hey, it's the first project that I've had the time to actually finish so I'm proud of it!! :). Total cost was like $30 but I do plan on spending a bit and making a nicer looking case for it in the future... maybe. I kinda like it this way. :)
     
    Kris, Matthew and cheese like this.
  7. Stitches 2 and a Half Dollarydoos Staff Member . .

    Joined:
    Feb 5, 2017
    Messages:
    1,238
    Likes Received:
    1,130
    Location:
    Banana Bender Land, Australia
    Portables:
    6
    Mine is more a pile than a workstation
    [​IMG]
     
    Miceeno and Ampz like this.
  8. Kris .

    Joined:
    Jun 14, 2017
    Messages:
    42
    Likes Received:
    36
    I'm just starting so this is my set up...I have been looking at all the forums and thank you everyone for all you do for this site!
     

    Attached Files:

  9. YveltalGriffin .

    Joined:
    Jun 7, 2016
    Messages:
    125
    Likes Received:
    137
    Location:
    New Mexico
    I cleaned up my workstation just for this thread! Talk about motivation! :XD:
    IMG_20170620_113038.jpg IMG_20170620_112926.jpg IMG_20170620_112953.jpg ...and here's the small but nonetheless depressing console graveyard. I don't even know what happened to the Dreamcast. It bit the dust after spending the winter in a box in the garage.
    IMG_20170620_112940.jpg
     
    Miceeno, Luca, Ampz and 1 other person like this.
  10. Kris .

    Joined:
    Jun 14, 2017
    Messages:
    42
    Likes Received:
    36
    I finished my custom desk from the scrap I get from work..now I have a bigger workstation woooooo!
    IMAG0331.jpg
     
    Luca, Aurelio, lyberty5 and 1 other person like this.
  11. Stitches 2 and a Half Dollarydoos Staff Member . .

    Joined:
    Feb 5, 2017
    Messages:
    1,238
    Likes Received:
    1,130
    Location:
    Banana Bender Land, Australia
    Portables:
    6
    Workstations you build yourself are so much better than premade. It looks good!
     
    Kris likes this.
  12. Kris .

    Joined:
    Jun 14, 2017
    Messages:
    42
    Likes Received:
    36
    Right!!! I am all about DIY...thank you!
     
  13. cheese the tallest memer in town Staff Member . . .

    Joined:
    Mar 2, 2016
    Messages:
    2,486
    Likes Received:
    2,212
    Location:
    Florida
    That setup looks pretty dope, however I see no soldering iron ( ͠° ͟ʖ ͡°)
     
    BocuD and Kris like this.
  14. Kris .

    Joined:
    Jun 14, 2017
    Messages:
    42
    Likes Received:
    36
    My cheapo soldering iron is inside that drawer I built into the desk..I would like a better one..I haven't really done any trimming or connecting to the Wii because I'm looking into what would be the best one for me to get... I really need to get a smaller tip ..any suggestions?
     
  15. cheese the tallest memer in town Staff Member . . .

    Joined:
    Mar 2, 2016
    Messages:
    2,486
    Likes Received:
    2,212
    Location:
    Florida
    Basically any iron with a temperature knob is gefgw. If you've got the money, go for a hakko station
     
    Kris likes this.
  16. Fruity_Grebbles .

    Joined:
    Jun 21, 2016
    Messages:
    323
    Likes Received:
    456
    Location:
    Northern New Jersey
    In all of it's glory. Definitely need to clean today.

    PANO_20170705_134904.jpg IMG_20170705_135006.jpg
     
    Miceeno, Stitches and Kris like this.
  17. Stitches 2 and a Half Dollarydoos Staff Member . .

    Joined:
    Feb 5, 2017
    Messages:
    1,238
    Likes Received:
    1,130
    Location:
    Banana Bender Land, Australia
    Portables:
    6
    Fruity_Grebbles and DeoNaught like this.
  18. Fruity_Grebbles .

    Joined:
    Jun 21, 2016
    Messages:
    323
    Likes Received:
    456
    Location:
    Northern New Jersey
    Yeah, but you noticed it, didn't you?

    (I totally don't work for Staples)

    /r/hailcorporate
     
    YveltalGriffin and Stitches like this.
  19. Nold C L U B C L A M S H E L L Staff Member . .

    Joined:
    Jul 16, 2017
    Messages:
    299
    Likes Received:
    866
    Location:
    EU
    Portables:
    4 + 1*π
    Here is mine, when it's cleaned up :D ATM It's a mess :D
    nold-workshop.jpg

    Oh.. and I've finally got an oscilloscope now & a better lamp :)
     
    Miceeno, Luca and Kris like this.
  20. cheese the tallest memer in town Staff Member . . .

    Joined:
    Mar 2, 2016
    Messages:
    2,486
    Likes Received:
    2,212
    Location:
    Florida
    Nice, also does that happen to be top and vim in screen or tmux? Either way nice arch linux :P
    Also totally jealous of the tower of mini drawers, I've only got one and it's not full...
     

Share This Page

Loading...