This project which I have already finished but I never had the opportunity to present it in this community, which in fact is the one to which I owe the idea of making it, since a large percentage of the ideas were taken from this website.
It all started with the idea of creating a portable PS2, but due to the delay that the arrival of some components needed for the project was having. Everything took a turn and he suggested the idea of creating a PlayStation2 Classic Mini instead of the Portable PS2.Todo dió un jiro y sugirió la idea de crear una PS2 mini en ves de la PS2 portatil.
-As hardware was used:
-The motherboard of a cutaway PlayStation 2 model 790XX
-An OrangePi configured as a Router, since we are going to run the games via NETWORK
-USB to Sata adapter, which is inside what would simulate the SONY NETWORK adapter
-An ESP32, with the BlueRetro system installed, to use Bluetooth gamepad
-Plastics from a TV, which were used to create the casing of the TV PlayStation2 Classic Mini
-PCB glue, to glue all plastics and achieve the finish of the casing
And so this project was left, which I hope more than one of you liked and are encouraged to do, I just have to tell you that any questions you may have can ask me. And if you want, you can go through my YouTube channel where I have videos showing more about this beautiful console.
It all started with the idea of creating a portable PS2, but due to the delay that the arrival of some components needed for the project was having. Everything took a turn and he suggested the idea of creating a PlayStation2 Classic Mini instead of the Portable PS2.Todo dió un jiro y sugirió la idea de crear una PS2 mini en ves de la PS2 portatil.
-As hardware was used:
-The motherboard of a cutaway PlayStation 2 model 790XX
-An OrangePi configured as a Router, since we are going to run the games via NETWORK
-USB to Sata adapter, which is inside what would simulate the SONY NETWORK adapter
-An ESP32, with the BlueRetro system installed, to use Bluetooth gamepad
-Plastics from a TV, which were used to create the casing of the TV PlayStation2 Classic Mini
-PCB glue, to glue all plastics and achieve the finish of the casing
And so this project was left, which I hope more than one of you liked and are encouraged to do, I just have to tell you that any questions you may have can ask me. And if you want, you can go through my YouTube channel where I have videos showing more about this beautiful console.
