- Joined
- Dec 30, 2017
- Messages
- 23
- Likes
- 9
Hi I'm looking to start a new project, it's going to be another non-portable wii but this time I will try to do a OMGWTF trim so it can fit in a brook gamecube adapter, which is pretty small: https://goo.gl/images/PHqP3c . Question number 1: Just how small can we trim the OMGWTF before running into issues? I know it is possible, but what is the limit and where are we allowed to cut inside the lines?
Question number 2: I have read the guide about regulators but it more inclined towards using a battery, I was thinking about using a phone charger, something like 5V 2A wich would be 10W, and the wii, according to
Question 3: If so, would it be possible to wire 5v directly to the unregulated phone charger, and use the TI regulators to get 1.15v, 3.3v and 1v from the same phone charger?
Thanks a lot!
Question number 2: I have read the guide about regulators but it more inclined towards using a battery, I was thinking about using a phone charger, something like 5V 2A wich would be 10W, and the wii, according to
needs ( 3.3x0.66 + 1.15x1.8 + 1.53) 5.8 watts. Am I correct?The Wii requires 3.3v at 0.66A, 1.15v at 1.8A, and 1v at 1.53A. Now that we know exactly what the Wii draws, we can use this information to pick out regulators that will fit these specifications.
Question 3: If so, would it be possible to wire 5v directly to the unregulated phone charger, and use the TI regulators to get 1.15v, 3.3v and 1v from the same phone charger?
Thanks a lot!