Worklog Nsfw (No Spaget for WiiGee)

Discussion in '2018 Summer Contest' started by DeoNaught, Jun 26, 2018.

  1. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    Should probably start a thread for my Wiip Cause Kuesa ain't gonna happen(Money, and time), So I've been working on a Wiip for the contest.
    Here's what I have right now, getting a Package from Ginger in a couple of days with memes galore.

    Here's what's in in Progress( W.i.i.p ;D )

    Porkress
    I've gotten most of my Three controller meme dones(CTRLMII) Much thanks to @JacksonS For when I first started working on the three controllers, wouldn't have gotten to where I am now without him. It's not done, still need to clean it up, and connect several lines, and ground plane.
    upload_2018-6-25_18-51-21.png
    [​IMG]
    Btw, never do anything more than two ic's for first eda project, anyone who said they had fun with more, are lying. But to be fair, my opinion doesn't matter.
     
    GingerOfOz, Miceeno, BocuD and 2 others like this.
  2. GingerOfOz send waluigi memes Staff Member . . .

    Joined:
    Dec 16, 2016
    Messages:
    632
    Likes Received:
    1,424
    Location:
    The Oregon Wildlands
    Portables:
    Wahn
    I have distressing news. Last night a horde of GC+'s broke down my door and swarmed over me and my house! There were various chants of "kill the killer" and I was pinned to the wall while they took something away. What was it and where did it go?....
     
  3. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    Y-you mean you weren't the one texting me last night?
     
  4. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    Hey guys my digikey package came in today!
    IMG_3708.JPG

    That's not Regular Digikey packaging is it?
    IMG_3709.JPG

    Oh no
    IMG_3710 (1).JPG
     
    Miceeno, Noah, YveltalGriffin and 6 others like this.
  5. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    So i'm working on my wii, just slow progress, because as soon as I get two steps forward, I have to go fifteen steps backwards, and it just ain't working, But Imma still try until the end of the contest :_
    (also hoping posting this will motivate other's to start posting more progress of their projects *cough* *cough*)
    But here's some of my case
    dbhf.PNG jkkkkk.PNG
     

    Attached Files:

    Miceeno, Aurelio and cheese like this.
  6. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    Moar updaters
    bacdss.PNG

    Got like 75 percent of the back done I think, still debating on whether or not to make a breakout for my Pth's(pls no ban), to save a bit of space. I wanted to make my own, using the reg everyone is using now, to save battery life and even more space, but I simply won't have enough time or money I already have the PTH's, so i'd just make a simple board for them, and have my bms, and balancer on that board. So I think i'm gonna go breakout board pth style, unless someone has a better, and possibly cheaper method for this.

    Got speakers and all the button guides done(except for Z and L/R). oops, forgot to take a pic of the back, ignore those red blips, Glitch with something I need to fix. I think I'm almost done for the case, Just need some holes, and al la screw posts.
    Capture.PNG

    IMG_3713.JPG
    Fucked up Avl, so waiting for Flux to fix it, this really sucks, because I realized a couple days later that it's not even the right pins I need to solder to for Vga T-T

    Made some ds lite button things
    [​IMG]
    Thanks @BocuD and @Aurelio , lets not mention my Dyslexia while I made these kek lmao

    you can use these if you want, I haven't ordered them yet to make sure that everything fits. (but they very much should.)
    but they cost like $5 to order from Oshpark
     

    Attached Files:

    Miceeno, MRKane, Nold and 5 others like this.
  7. cheese the tallest memer in town Staff Member . . . .

    Joined:
    Mar 2, 2016
    Messages:
    2,161
    Likes Received:
    2,072
    Location:
    Florida
    RIP
     
    DeoNaught likes this.
  8. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    I realized right before I was gonna solder to the AVL on my other wii
     
  9. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    My Wii trim died, and now I want to be died.
    But I got more progress done on other things after killing my depression.
    [​IMG]
    for my Z button, I have this cool setup called I hope this works™

    [​IMG]

    this is pretty much what it looks like, except it has part of screw posts in the back aswell, instead of just the front (Thanks Jeff for pointing it out). and the walls were made thicker.

    I think I finished my Reg board (any suggestions please suggest)
    [​IMG]
    Pretty basic, but should work I'll have ten, so if anyone wants one, I can populate the board(except the PTH08080, just caps and resistors ) for $5 + shipping. Size is 46.8 x 28.4mm, the 5v reg is gonna be something else ;p(jsyk because I thought I forgot it too). I'm gonna play ginger's game of friction fit, because i'm tired of perfectly measuring everything lul
     
    Miceeno, link270, BocuD and 2 others like this.
  10. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    is it a battery pack or a bomb? You decide!
    IMG_3755.JPG
    :rothink:
     
    Miceeno, Notjohnny and BocuD like this.
  11. Stitches 2 and a Half Dollarydoos Staff Member . . .

    Joined:
    Feb 5, 2017
    Messages:
    931
    Likes Received:
    891
    Location:
    Australia
    Portables:
    6
    Aurelio, Miceeno, DeoNaught and 4 others like this.
  12. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    Henlo frens, my two trims have 3v3 to gnd short, pretty sure it's because of the avl being screwed up, I have a wii I'm gonna trim, but it's homebrewed, what would be the best way to install pm, and nowifi?
    would it just be cheese installer through hb channel?
    Quick answer pls and thank
     
  13. Stitches 2 and a Half Dollarydoos Staff Member . . .

    Joined:
    Feb 5, 2017
    Messages:
    931
    Likes Received:
    891
    Location:
    Australia
    Portables:
    6
    yessums
     
    DeoNaught likes this.
  14. Dave Mackintosh . .

    Joined:
    Apr 1, 2017
    Messages:
    157
    Likes Received:
    113
    Location:
    UK
    Portables:
    0
    *knock knock* _We're agents from the NSA. We would like to see your bomb._
     
  15. cheese the tallest memer in town Staff Member . . . .

    Joined:
    Mar 2, 2016
    Messages:
    2,161
    Likes Received:
    2,072
    Location:
    Florida
    [​IMG]
     
    BocuD, Doom, Aurelio and 1 other person like this.
  16. DeoNaught . .

    Joined:
    Dec 10, 2016
    Messages:
    367
    Likes Received:
    360
    Location:
    Constant Fear
    Portables:
    1/8
    I won't finish for the contest. I was just gonna pour Hot glue into it,cause my pcbs aren't here, but I want to make something I'll be proud of, so i'm gonna redesign the case properly, and make more mounting systems, and moar pcb's, congratz to the people who actually did finish.
    here's progress with the old case and what not.
    IMG_3774.JPG IMG_3759.JPG IMG_3760.JPG IMG_3756.JPG
     
    nobble, Miceeno, BocuD and 6 others like this.

Share This Page

Loading...