Worklog Noah's Wiiner

[Shank]

How long are your wires you are running to the USB? They may be catching interference. IIRC, Gman solved his issues with this by either shortening or shielding the wires, but it would be easier and likely just as effective to twist the two USB data lines together, since they are differential signals.

Edit: Aurelio beat me to it

 

[Aurelio]

The wires?

Yeah I meant the wires, my bad

 

[Noah]

Twisting the wires didn't do anything unfortunately. I can boot into Priiloader and go into the HBC but no apps will show.

 

[Aurelio]

Have you tried to invert the two data lines? Maybe you got them wrong

 

[Noah]

Yeah, we tried that a couple of times.

Which pair is the pair you're supposed to boot off of? 2 and 3 or 6 and 7?

 

[Aurelio]

6 and 7

 

[Noah]

OH

well that would do it LMAOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Thanks!

 

[Aurelio]

Noah's kicking some asses

 

[Noah]

Next I'll ask why my board isn't getting 3.3V and I'll have voltage and ground swapped just wait

 

[Aurelio]

Next I'll ask why my board isn't getting 3.3V and I'll have voltage and ground swapped just wait

I'm ready to call the firefighters

 

[Noah]

This project described in song:

 

[Noah]

Alright new change. The drive initializes but still does not boot into portablizemii. I can boot into Priiloader with no issues though.

 

[Aurelio]

Does priiloader show anything if you go to the "Load/Install file" menu?

 

[Noah]

No FAT device found!

 

[Aurelio]

That means that the USB is not wired correctly. Check your wirings (also if the data lines are inverted)

 

[Noah]

Still no luck. I've tried swapping them and braiding them. The drive initializes as if it's turning on but after the initial light it does nothing and PortablizeMii doesn't boot

 

[Aurelio]

Did it work before trimming? Otherwise try with another drive

 

[Noah]

Yeah it did. I'll order one of the drives that everyone else is using and see if that helps

 

[Aurelio]

Nah if it worked before then the problem is elsewhere... Can you post a picture of your wirings?

 

[Noah]

Sure, let me run down and take them