Hi,
not much, but here are some alternative & noob-friendly locations for (PAL) Composite-Video, Controller*-Data & AMP-NUS Audio (for slightly trimmed boards).
Composite aka "VIDEO" @ DENC-NUS / PAL-N64:
Alternative audio locations (if AMP-NUS is still present/working after trimming):
Simple controller-data locations*:
*Note: The small components marked as FIL-2, FIL-3, ... can be removed, too. Then the controller can be soldered to the upper pad (as seen from the image).
not much, but here are some alternative & noob-friendly locations for (PAL) Composite-Video, Controller*-Data & AMP-NUS Audio (for slightly trimmed boards).
Composite aka "VIDEO" @ DENC-NUS / PAL-N64:
Alternative audio locations (if AMP-NUS is still present/working after trimming):
Simple controller-data locations*:
*Note: The small components marked as FIL-2, FIL-3, ... can be removed, too. Then the controller can be soldered to the upper pad (as seen from the image).