My Purple and Black G-boy

Joined
Jun 22, 2020
Messages
11
Likes
5
Started wiring up my kit today, couldn't wait to get into it. I have a wii still running portablize, I'll deal with changing the files on the USB drive next...

All buttons feel good, with minimal adjustment once I got the excess 3d filament off. I drilled the screw posts with a 1/16 bit and worked a screw in each one before I started placing pcb's in the case. That made a huge difference. I realized that I bought the wrong batteries, mine have the protection circuit built in and are 1/8 " too long because of it... So I can't test the wiring until I get more. Pretty sure I remember a thread recommending batteries, I'll dig unless someone has the link handy!

Next I get to use my hot air station to work on that wii mobo...

7695C987-0B31-486D-91C4-39922ACAE5AA.jpeg
 
Joined
Jun 22, 2020
Messages
11
Likes
5
Close enough for some sanding... I think. I didn't hit any traces and the chip on the back is untouched.

U10 relocated and ldo removed. Pre-sanding... Now on hold for batteries.

0C2E5791-50C6-4BE3-9A9A-5399E12BD740.jpeg
 
Top