I've been lurking on the forums and reading guides and stuff recommended to me for a couple days and I'm gonna start making my portable soon. I'm planning on making a slightly altered Gwii to start out with using the usb-c charging/drive on the bitbuilt store instead of the external usb port found on the original Gwii. here's my parts list so far if I'm missing anything important it would be great if i could get some help with what I'm missing or unnecessarily including.
Parts
Parts
- a 4 layer Wii for trimming
- Gc+
- Gamecube controller for buttons joysticks etc
- pth 08080 regulators (not sure where to buy)
- red charging board (same as regulators)
- Samsung fit 256 or 128 usb
- 5" 4:3 screen (not sure if im going to vga mod but i possibly might)
- on off switch
- magnet wire
- printed out Gwii cad files
- 4 18650 batteries
- usb c charging/ internal hard drive thing
- SP-1511S-3 speaker(s) and amp
- wire /magnet wire i belive 22 and 26 gauge
- fan + heat sink
- m2 screws
- solder
- power management system
- tacts for sholder buttons and face buttons
- soldering iron (got one already)
- dremel
- multimeter (possibly have one)