Question Mx chip relocation help

Joined
Mar 15, 2023
Messages
58
Likes
9
Just started to plan out everything before i trim my wii for the ashida build ive been working on. Just to confirm, i will not need to relocate u10 as one of the other components emulates it, correct? Another question i had was is the wire that connects the positive side of the 3v battery to TP118 the same kind as the one that connects the negative side? I checked the mx relocation guide but it didnt clarify very clearly
 

Attachments

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
3,776
Likes
2,982
Location
Banana Bender Land, Australia
Portables
6
Correct, you don't need to do the U10 relocation if you're using a PMS-2 or PMS-Lite. You just run a wire from the U10 pad on the PMS to the U10 via on the Wii and it does the same job as the relocation.

For the CMOS battery, the negative terminal for the cell can be connected to any ground location
 
Top