Worklog Jeff's First Portable :NOGC: Edition

[jefflongo]

When I wired my gc+ the main stick slider in the full down position resets the cursor to the center of the screen,all others directions work fine.. also when wiring the tact i tried wiring the A button but I'm getting no response when trying to select an option in portablize me. One wire from tact leg to ground the other tact leg to data "a" on the gc+ correct? @jefflongo

This is probably better in your own thread since it's not relevent to mine, but you will have to check your wiring on the y axis for the stick, and yes you have the tact between gnd and data. This is the case for all except R/L analog which go to 3.3v. Check that you're connecting to the correct sides of the tact.

 

[Adam Hudson]

Sorry, I was trying to post threads with no answer and was getting impatient. I should have just pmd you.. but thank you

 

[Ewhizz]

Do you think you or Gman could link me the screen??
THANKS