Solved Is the 3d model supposed to look like this?

Joined
Jan 14, 2020
Messages
27
Likes
4
Hey, I just put the g-wii top half in fusion 360 but it turns pink and has marks all over it.
Is there a way to fix this?
gwii.PNG
 

Noah

The Manager
Staff member
.
.
.
Joined
Jan 16, 2016
Messages
1,960
Likes
2,494
Location
The World Wide Web
Portables
You can’t import an STL back into Fusion without it becoming a mesh model like you’re seeing there.

Gman is kind enough to provide the SolidWorks files for the case so if you import those you’ll get both the correct sizing (when you import STLs I believe they’re 10x larger than normal) and the ability to actually edit the case normally.
 
Joined
Jan 14, 2020
Messages
27
Likes
4
You can’t import an STL back into Fusion without it becoming a mesh model like you’re seeing there.

Gman is kind enough to provide the SolidWorks files for the case so if you import those you’ll get both the correct sizing (when you import STLs I believe they’re 10x larger than normal) and the ability to actually edit the case normally.
Ahh ok thanks, because I wanted to use his case but I wanted to try to add my own little designs to it.
I'll mark this as solved:)
 
Top