Question Indicator LED not turning on

[RedVelvetPepper]

Hello. I ordered a new PMS lite from 4layertech and got it wired up. Everything works fine now - no more power button issues. Cells are charging. However, the status led refuses to turn on. I've soldered on the address pin which is furthest from the flat side of the led, connected the anode and cathode (even tried reversing them), and have set the status indicator type to addressable in the power menu. I'm not sure what else could be wrong. I tested the led with my arduino to check to see if it work working, and sure enough, it is. Strangely, when i programmed it to flash red it flashed green, and vice versa, not sure if that's relevant. Any help would be appreciated! Hopefully this is my last hurdle.

 

[RedVelvetPepper]

Can anyone help with this?

 

[GingerOfOz]

With the addressable LED, you have to enable that feature in the power settings of RVLoader once the PMS is connected to the Wii. The LED won't light up until you do, as basic LED is the default configuration.

 

[RedVelvetPepper]

I've done that but it still wont turn on .

 

[RedVelvetPepper]

It's supposed to turn on when charging, correct?

 

[Gman]

Try connecting the A pin on the opposite side leg that you have it currently.