Model [Guide / Release] Noldendo Wii Miicro

[Pablo]

I haven't started my built yet, but I want to get everything right in my head. I can't seem to find where the mote sinc button comes from, not on this page, the 4 and 6 layer trim guides.

https://bitbuilt.net/forums/index.php?threads/the-definitive-wii-trimming-guide.198/

It under the blutooth section on the BT module, pin 12

 

[Sepencer]

Do you need to relocate U10?

 

[CrazyGadget]

Do you need to relocate U10?

Yessir

 

[Sepencer]

Yessir

So I need to relocate U10, then the trim MX chip.
(I was just confused because the trim on the MX chip cuts through U10 and U9)

 

[Stitches]

Yeah, you relocate U10 first, test to make sure it boots, then trim, test the trim to be sure it boots, then relocate MX

 

[John]

Would it be fine to use a 4-layer Wii board?

 

[emu_kidid]

An update - sort of. 7 months later and I'm still waiting on my RVL-PSU's One day I'll be able to do this project hehe

 

[Nold]

Would it be fine to use a 4-layer Wii board?

Nope, it wouldn't fit in the case.

An update - sort of. 7 months later and I'm still waiting on my RVL-PSU's One day I'll be able to do this project hehe

Damn Sorry dude, can't wait to see your build!

 

[eostafin]

could i use a four layer board?

 

[CalebPikmin]

could i use a four layer board?

Nope, it wouldn't fit in the case.

Sadly looks like no

 

[CrazyGadget]

I assembled some PSU boards and wanted to use one in the Noldendo, but alas, "soon(TM)" claims another victim. So, I whipped up a PSU mount and figured I should share it here as well!

 

[ewkurt]

Could you post the .stl for the mushroom template? It's my favorite one but I can't find it in the zip )^:

 

[luismendez]

hello, I'm doing this project, but I've been left with several doubts, the first is in the 12 volt wiring, if it is necessary to do it or it can be omitted, and in the 5 volt wiring, it is not seen in the images, but this should it be fed at 5 volts from the regulator? and with these 5 volts should you turn on the fan? I appreciate your help

 

[CrazyGadget]

hello, I'm doing this project, but I've been left with several doubts, the first is in the 12 volt wiring, if it is necessary to do it or it can be omitted, and in the 5 volt wiring, it is not seen in the images, but this should it be fed at 5 volts from the regulator? and with these 5 volts should you turn on the fan? I appreciate your help

The 12v is for the sensor bar and onboard audio amp, so you'll definitely want that wired up. Yes, 5v comes from your regs. The fan plugs right into the Wii in its original spot, so no need to rewire it.

 

[luismendez]

thanks, connecting the 5v will turn on the fan? for now I only have the 12v and it doesn't turn on, greetings

 

[bigfloppa234]

This is sick, but are there any 3D printable Wii mini shells/cases that fit this design? I'd love to use one when I attempt to make my own Wii micro!

 

[Nold]

This is sick, but are there any 3D printable Wii mini shells/cases that fit this design? I'd love to use one when I attempt to make my own Wii micro!

Yea, this one: ;-)

3D Model Download: release_v1 [Thingiverse Mirror]

 

[bigfloppa234]

I meant something like this (image below) that fits the Wii micro, sorry if what I was typing wasn't understood properly.

 

[AFE123]

I meant something like this (image below) that fits the Wii micro, sorry if what I was typing wasn't understood properly.

Well, you can check the 3D repository to see if it was 3D scanned. If it's not available, you can also check online. If not, ¯\_(ツ)_/¯ .