The GCiiPocket v2 is finished & now called GC2go!
Features:
- Wii with NAND, MX & AVE relocation
- 3.5" 480p IPS screen using VGA
- PMS, USB-PD & GC+2
- 256GB internal storage
- WiiHUD audio amp
- over 5000mAh 1s2p battery
- Custom PCBs
- 9 "smart" sk6805 LEDs that light up the buttons
- LEDs & Display OSD controlled by SAMD21 microcontroller, controlled via i2c from the wii
- USB-C docking station for charging
- 3D printed & sanded case using Carbonfil & Prusament PLA
- Size: 144x75x27mm
- Custom buttons are 3d printed, sanded & resin casted
The software for the NPC is not quite finished yet, but i2c communication is working fine. The PMS has a slightly modified firmware, which features temperature dependent fan control.
Worklog: https://bitbuilt.net/forums/index.php?threads/2021-contest-entry-gciipocket-v2-plus-pro-slim.4313/
Features:
- Wii with NAND, MX & AVE relocation
- 3.5" 480p IPS screen using VGA
- PMS, USB-PD & GC+2
- 256GB internal storage
- WiiHUD audio amp
- over 5000mAh 1s2p battery
- Custom PCBs
- 9 "smart" sk6805 LEDs that light up the buttons
- LEDs & Display OSD controlled by SAMD21 microcontroller, controlled via i2c from the wii
- USB-C docking station for charging
- 3D printed & sanded case using Carbonfil & Prusament PLA
- Size: 144x75x27mm
- Custom buttons are 3d printed, sanded & resin casted
The software for the NPC is not quite finished yet, but i2c communication is working fine. The PMS has a slightly modified firmware, which features temperature dependent fan control.
Worklog: https://bitbuilt.net/forums/index.php?threads/2021-contest-entry-gciipocket-v2-plus-pro-slim.4313/
Last edited: