Worklog g-wii build

Joined
Aug 2, 2016
Messages
291
Likes
140
20200512_164525.jpg
20200512_165709.jpg
received_786751731852260.jpeg
Everything minus the controller is wired up and running at this point, with the pms on hand I was forced to remove the component on the screen that lets me run it at 5v. I also detached the header for the screen controls
I might not have the room for the board that held the original tact switches so I'll probably make the custom resistor circuit. I also messed up my back half so the edges warped a little, I got a new one that I'm fixing up -- also had to patch up the on/off switch to replace it with a hole. Not sure if the final color pallet is going to be used?
 
Joined
Aug 2, 2016
Messages
291
Likes
140
20200613_220309.jpg

Currently have the front layed out, the abxy and dpad are screwed in place, wired up to the gc+ that I got years ago from aurelio, I still have the sand the holes for the joysticks so they stop sticking but they're gonna be set in place towards the end of the front assembly. I'm going to wire up the screen and amp soon so I can make sure it all works (and the menu controls might be wired wrong)
 
Top