Question Exception (DSI) occurred error when GC+ is connected

[John]

I seem to be getting a DSI error when I connect my GC+ to the Wii. I know the GC+ works because after 3 seconds it brings me to the home-brew page and I'm able to use the A button. I've tried re-soldering the chip on the GC+ and re-flashing it, but it hasn't helped. This error only happens when my P1 data line is connected to the GC+.

 

[cheese]

Got pictures of your board?

 

[John]

Got pictures of your board?

Sure, I can take some photos. I'll make sure they're clear.

 

[Aurelio]

Have you connected both sticks to the GC+? If not, do it

 

[John]

Have you connected both sticks to the GC+? If not, do it

They've been connected.

 

[Aurelio]

Make sure that you have no shorts on the GC+. Check for shorts between the data line and ground or 3.3V

 

[John]

Make sure that you have no shorts on the GC+. Check for shorts between the data line and ground or 3.3V

I will check the voltages before I take pictures. Thanks for the info!

 

[John]

Make sure that you have no shorts on the GC+. Check for shorts between the data line and ground or 3.3V

I checked, I don't have any shorts. I'm taking a picture of the board now. I appreciate the help. I honestly have no idea what this could be.