Ah crud, yeah it says it needs 10-30 volts right? Is there a way to make it work or is this screen useless to me?Well just off the top you're probably gonna have a hard time getting it to turn on with only a 7.4 volt battery
Some ebay screens will not awake unless there is a video source connectedNo luck, I can't seem to get it to power on. I went back and checked the eBay page for it and it says "Power Supply: DC 6-32V" so that's kinda sketchy. Don't know if it's a faulty unit or faulty batteries...or I'm just doing it wrong? lol, The power button isn't even marked so I'm kinda just pressing all the buttons in hopes of it turning on.
Ah, okay I'll try it with something connected.Some ebay screens will not awake unless there is a video source connected
what about the other voltages. what ohm would you need to power the ps2 after trimming cant find it anywhere. maybe its just me being slow.That only outputs 1A, you need a bit more than that. That clerk needs to learn his shit.... This is the kind of regulator you want for the 6v mod https://www.digikey.com/product-detail/en/texas-instruments/PTH08080WAD/296-32715-ND/1573678 . You'll also need a 16v 100uf capacitor and a 330ohm resistor to make it output 5v.
what about the other voltages. what ohm would you need to power the ps2 after trimming cant find it anywhere. maybe its just me being slow.