Question building my first ps2 portable

Joined
Aug 17, 2021
Messages
40
Likes
6
I'm starting my first ps2 portable but i need help wiring this LCD screen taken from a portable dvd player WIN_20210818_11_39_33_Pro.jpgWIN_20210818_11_42_54_Pro.jpgthe good thing about this dvd player is that it kinda looks like wii u gamepad and i was thinking about using it for my built too, as you can see in the pictures WIN_20210818_11_40_36_Pro.jpgWIN_20210818_11_41_13_Pro.jpg this comes with 2 Ni-MH AA1500 7.2V batteries which i could use in my build, I know a little about soldering I'm having trouble figuring out where to solder the AV from the ps2 to the screen, do i need to buy a driver board like this one https://www.buydisplay.com/5-inch-lcd-screen-tft-module-800x480-vga-video-av-driver-board to be able to use it or can i solder the AV wires from the ps2 to the LCD screen directly
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
.
Joined
Feb 5, 2017
Messages
4,072
Likes
3,193
Location
Banana Bender Land, Australia
Portables
6
The other driver board, the bigger one that feeds the smaller two. The ones you've shown are what looks like a backlight regulator and FFC adapter.
 
Joined
Aug 17, 2021
Messages
40
Likes
6
The other driver board, the bigger one that feeds the smaller two. The ones you've shown are what looks like a backlight regulator and FFC adapter.
i threw that part away, i thought it was not important, but i have this other screen taken from another portable dvd player, it has in/out av ports, how do i connect this screen
IMG_20210829_145809703.jpg

IMG_20210829_150635776.jpg



IMG_20210829_145825462.jpg


to this ps2 board
IMG_20210829_150957626.jpg
 

Attachments

Stitches

2 and a Half Dollarydoos
Staff member
.
.
.
Joined
Feb 5, 2017
Messages
4,072
Likes
3,193
Location
Banana Bender Land, Australia
Portables
6
i threw that part away, i thought it was not important, but i have this other screen taken from another portable dvd player, it has in/out av ports, how do i connect this screen View attachment 18594
View attachment 18596


View attachment 18595

to this ps2 board
View attachment 18593
That board you threw away is the board that converts standard video inputs into the correct datastream for the LCD panel, what you have left from that device is useless now.

As for the other one, one or more of those 3.5mm jacks will have a pin that accepts composite video. You'll have to figure out which pin that is and wire it
 
Joined
Dec 6, 2020
Messages
227
Likes
261
Location
Canada
Portables
3
what is the model of the PS2 youre using? (it looks REALLY different than the slim 79001 model)
That is because it isn't a 79001, its 75001 or so, it's the board with the built in dvd drive on the motherboard. If it was a 70000 ish series there'd be a dial up port, but still not a 79001
 
Joined
Oct 3, 2020
Messages
60
Likes
16
That is because it isn't a 79001, its 75001 or so, it's the board with the built in dvd drive on the motherboard. If it was a 70000 ish series there'd be a dial up port, but still not a 79001
That is true. sadly i dont know much about the 75000 series. either way I wish you good luck on this project
 
Top