Solved bluetooth did not work

Discussion in 'Wii' started by xsping, Aug 25, 2019.

  1. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    56
    Likes Received:
    9
    recently i trimmed another 4 layer wii and all works fine include the bluetooth module except the wii menu because of unreasonably the 003 error, so i wired up sd card slot, after i installed cios80 and solved the 003 error, the bluetooth module did not work,i changed another two new bluetooth module,same bad news,all the tinned point reconfirmed good and not loose, i suspect the gpu had problem or software for the bluetooth had corrupted,is there any application to reset the bluetooth software? any help will be appreciated

    remark :i searched the whole forum, and found one guy have the same problem before, and unluckily not solved. desoldered the sd slot to ease troubleshooting, nothing changed, seems to get another disabled wii, only can play ngc.....
    i did the same thing on my another trimmed wii ,same story happened,i checked isos in wiimod, systemmenu installed on ios80,but still black screen,how can i install system menu again w/no wifi, and reinstall portablizemii
    problem solved, i copy another ios80file from another untrimmed wii,003 error come back, but blueteeth module works again,happy!
    finally,install kreankii to remove 003,system menu come back
     
    Last edited: Aug 26, 2019
  2. cheese the tallest memer in town Staff Member . . .

    Joined:
    Mar 2, 2016
    Messages:
    2,469
    Likes Received:
    2,198
    Location:
    Florida
    The 003 error? That comes from changing a Korean wii into another region... Not sure what software you want to reinstall, there isn't anything in specific on wiis that could corrupt for bluetooth. Any more info as to what software modifications you made might help
     
  3. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    56
    Likes Received:
    9
    after installed the ciso80 ,error 003 disappear got blackscreen, i was sure error 003 already removed,beacause i fixed another two 003 full wii with this method

    -merge-

    i
    I measured another untrimmed wii, data+ and data- of bt module outputs around 3.0v, same thing as the promblem trimmed wii, it seems good , but not work

    -merge-

    i did the same thing on my another trimmed wii ,same story happened,i checked isos in wiimod, systemmenu installed on ios80,but still black screen,how can i install system menu again w/no wifi, and reinstall portablizemii
     
    Last edited by a moderator: Aug 27, 2019
  4. Stitches 2 and a Half Dollarydoos Staff Member . .

    Joined:
    Feb 5, 2017
    Messages:
    1,201
    Likes Received:
    1,110
    Location:
    Banana Bender Land, Australia
    Portables:
    6
    Sadly you can't use PM on a Korean Wii, they aren't an option when generating the pack. PM only works with PAL, NTSC-U and NTSC-J. If you can get into bootmii and make a NAND backup, someone (like me) can build a new NTSC-U or NTSC-J NAND from it that you can flash to the Korean Wii and bypass the 003 error entirely.
     
    cheese likes this.
  5. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    56
    Likes Received:
    9
    thanks
    thanks for your reply,and very curious about how to remove 003 from nand, find cpu code from 003 nand, and change the normal nand with 003 cpu code?
     
  6. Shank Certified Wiitard Staff Member . .

    Joined:
    Jan 31, 2016
    Messages:
    1,057
    Likes Received:
    1,976
    Location:
    Texas
    Portables:
    3
    [​IMG]
     
    Ekterm, StonedEdge and Stitches like this.
  7. Stitches 2 and a Half Dollarydoos Staff Member . .

    Joined:
    Feb 5, 2017
    Messages:
    1,201
    Likes Received:
    1,110
    Location:
    Banana Bender Land, Australia
    Portables:
    6
    I'm sorry, I don't understand the question. Are you asking how changing a Wii's region through NAND backups works?
     
  8. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    56
    Likes Received:
    9
    thank for your funny picture
     
  9. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    56
    Likes Received:
    9
    yes,i am curious about editing the wii nand
     
  10. Luis Mendonça .

    Joined:
    May 10, 2019
    Messages:
    22
    Likes Received:
    11
    By 003 you mean the 003 error brick? You want to know how to unbrick a 003 wii?
     
  11. Stitches 2 and a Half Dollarydoos Staff Member . .

    Joined:
    Feb 5, 2017
    Messages:
    1,201
    Likes Received:
    1,110
    Location:
    Banana Bender Land, Australia
    Portables:
    6
    First you use BootMii to make a backup of your Wii, it'll make a nand.bin and keys.bin file. Then you download a program called "ohneschwanzenegger", tell it to make a new NAND image, direct it to the backup you made for that Wii, and tell it to remake the NAND image in a different region. It'll take a while to download the files because the NUS servers are slow as balls. Once the new NAND image is made, you use BootMii to flash the new image to the Wii. Then you have a fresh stock Wii of your region of choice.

    Just beware, if you do it wrong you WILL perma-brick the Wii. You have to make a backup for each Wii you want to region change and you must ONLY use the backup for that Wii when making the new image. Using a nand.bin backup for the wrong Wii will break it forever, so make sure you organise your files properly if you want to try it yourself.
     
  12. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    56
    Likes Received:
    9
    ok,i will try,thank you very much
     

Share This Page

Loading...