Worklog An attempt to recreate the PS2 PCB

[Mister M]

¡El trabajo que hizo es increíble! ¡Me sorprendió 100%! ¡Ingeniería inversa y todo ese trabajo! Ahora mi duda ¿utilizará 7.3v en toda la placa? ¡He visto colegas que ejecutaron el sistema a 5v y funcionan bastante bien! así que estudie solo el dac de audio y el joystick usan 7.3v; Los motores vibratorios usan 5v aunque los joysticks llegan a 7v, el procesador envía 5v a una resistencia y esta baja su voltaje en un 40%, llegando al motor con un mínimo de 0,60v y un máximo de 3,08v. ¡Vibración! y lo negativo o masa es la variable!, lo positivo va directo! Y mi última pregunta, ¿se venderán las planchas o limas? ¡Tengo muchas ganas de trasplantar todo a tu creación! ya que tengo varios 90k para probar! Ahora mismo estoy armando uno pero recortado! ¡Y me resulta un poco difícil sin microscopio!

Hello, sorry but I couldn't understand, please edit and write in English.

 

[Y2K]

¡El trabajo que hizo es increíble! ¡Me sorprendió 100%! ¡Ingeniería inversa y todo ese trabajo! Ahora mi duda ¿utilizará 7.3v en toda la placa? ¡He visto colegas que ejecutaron el sistema a 5v y funcionan bastante bien! así que estudie solo el dac de audio y el joystick usan 7.3v; Los motores vibratorios usan 5v aunque los joysticks llegan a 7v, el procesador envía 5v a una resistencia y esta baja su voltaje en un 40%, llegando al motor con un mínimo de 0,60v y un máximo de 3,08v. ¡Vibración! y lo negativo o masa es la variable!, lo positivo va directo! Y mi última pregunta, ¿se venderán las planchas o limas? ¡Tengo muchas ganas de trasplantar todo a tu creación! ya que tengo varios 90k para probar! Ahora mismo estoy armando uno pero recortado! ¡Y me resulta un poco difícil sin microscopio!

DeepL copypasta translation:

"The work you did is amazing! i was 100% amazed! reverse engineered and all that work! Now my doubt will you use 7.3v throughout the board? I have seen colleagues who ran the system at 5v and they work quite well! so study only the audio dac and joystick use 7.3v; The vibrating motors use 5v although the joysticks go to 7v, the processor sends 5v to a resistor and this lowers its voltage by 40%, reaching the motor with a minimum of 0.60v and a maximum of 3.08v. vibration! and the negative or mass is the variable!, the positive goes direct! And my last question, will the irons or files be sold, I'm looking forward to transplanting everything to your creation! as I have several 90k's to test! I'm putting one together right now but trimmed! And I'm finding it a bit difficult without a microscope!"

This is primarily a English language forum, please use English when writing your posts (machine translations are also fine).

 

[Mister M]

I'm using custom regulators created by @Gman, the board is powered via USB-C at 5V 3.1A, this power is managed by an IC IP2721-D, which in turn powers the Texas instruments BMS, as it is a portable PS2 , I prioritized reducing consumption and weight of the console, so I will not use engines. And I have a mod that lowers the EE consumption and consequently the EE temperature.

 

[juanxc]

Hello, sorry but I couldn't understand, please edit and write in English.

The work he did is incredible! I was 100% surprised! Reverse engineering and all that work! Now my doubt will it use 7.3v on the entire board? I have seen colleagues who ran the system at 5v and they work quite well! so study only the audio dac and joystick use 7.3v; The vibrating motors use 5v although the joysticks reach 7v, the processor sends 5v to a resistor and this lowers its voltage by 40%, reaching the motor with a minimum of 0.60v and a maximum of 3.08v. Vibration! and the negative or mass is the variable!, the positive goes direct! And my last question, will the plates or files be sold? I really want to transplant everything to your creation! since I have several 90k to try! Right now I'm putting one together but cut down! and it's a bit difficult for me without a microscope!

 

[juanxc]

Estoy usando reguladores personalizados creados por @Gman, la placa se alimenta vía USB-C a 5V 3.1A, esta energía es administrada por un IC IP2721-D, que a su vez alimenta el Texas Instrumentos BMS, al tratarse de una PS2 portátil, prioricé reducir el consumo y el peso de la consola, por lo que no utilizaré motores. Y tengo un mod que baja el consumo de EE y en consecuencia la temperatura de EE.
[/CITA]

 

[juanxc]

I had translated it into English but my automatic translator had translated it into Spanish! apologies! now excellent when using 5v and already done consumption tests! ? in games like god of war? And regarding the DAC audio? And in its design are there options to pull a 5v voltage line to the joystick? I'm interested in the vibration option! Is it more immersive and can the pcb design be obtained? and what is the low consumption mod?

 

[Mister M]

DRIVE LCD RTD2660H

https://bitbuilt.net/forums/index.php?threads/driver-lcd-rtd2660h.6493/