- Joined
- Jun 26, 2018
- Messages
- 4
- Likes
- 6
This is the worklog for the 3dfx, a home console themed around the venerable graphics accelerator manufacturer of the same name. I have two main goals with the project:
Along with the base configuration, there will be some extra hardware I'll be adding to the system to bring it into 2020. Since this is going to be a console that's meant to be plugged into the TV, I will be embedding a VGA to HDMI conversion board as well as an Xbox 360 wireless controller adapter. For the controller adapter, I'm hoping to dig a bit into the PCB design of the slim 360's RF module as it seems to be a pretty interesting 1-chip design. The idea would be to design a custom PCB that handles the controller wireless adapter functionality and incorporates an Arduino to trigger things like sync. I found this really interesting article on the subject that should prove to be useful.
Finally, to capture what it felt like to be a PC game in the late 90's, I felt that a case badge was equally as important as the case itself. However, this is 2020. We can have a bit more flair with our badges. We have access to things like 128x128 1.5" OLED displays:
Stay tuned
- The console should feel modern as if 3dfx were around today
- The hardware and software should be representative of the 3dfx/Glide era
- VIA EPIA-800AG motherboard (800mhz VIA CPU)
- 256MB SDRAM
- 3dfx Voodoo 3 2000 PCI
- Audio provided via onboard AC'97 controller
- SD to IDE adapter for hard drive space
- (Potential) slot loading IDE CD drive
Along with the base configuration, there will be some extra hardware I'll be adding to the system to bring it into 2020. Since this is going to be a console that's meant to be plugged into the TV, I will be embedding a VGA to HDMI conversion board as well as an Xbox 360 wireless controller adapter. For the controller adapter, I'm hoping to dig a bit into the PCB design of the slim 360's RF module as it seems to be a pretty interesting 1-chip design. The idea would be to design a custom PCB that handles the controller wireless adapter functionality and incorporates an Arduino to trigger things like sync. I found this really interesting article on the subject that should prove to be useful.
Finally, to capture what it felt like to be a PC game in the late 90's, I felt that a case badge was equally as important as the case itself. However, this is 2020. We can have a bit more flair with our badges. We have access to things like 128x128 1.5" OLED displays:
Stay tuned