- Joined
- Mar 4, 2017
- Messages
- 56
- Likes
- 10
Another day, another question.. I'm getting close to my first succesful 6 layer trim! All the voltages are now right at the right places, the processor seems to heat up a bit when turned on BUT no signal towards the TV, not from the official connector or from a temporarily attached video line. With the help of Aurelio I've come quite far in this (removing unused caps) but up till now this seems to be the last issue (not the right voltage/signal from u10)
Below are my pics before some changes advised by Aurelio but everything seems to be as required from this point on... so what could cause this voltage on the first ever wii-board? (it's so old it doesn't even have a version near the battery holder!)
https://photos.google.com/share/AF1...?key=YnFZeDFBM1o1bTVzS2NEcFNUSzVEaGdBYnlHYmNn
Below are my pics before some changes advised by Aurelio but everything seems to be as required from this point on... so what could cause this voltage on the first ever wii-board? (it's so old it doesn't even have a version near the battery holder!)
https://photos.google.com/share/AF1...?key=YnFZeDFBM1o1bTVzS2NEcFNUSzVEaGdBYnlHYmNn