ps2

Hello everyone, I wanted to share my PS2 Portable built which i started back September 2020. On the 27th Sep. 2020 I opened a thread which startet this project So what did i do? Let's see: The Case: So i am a lucky and proud owner of a 3D printer and rudimentary CAD skills. I designed the...

Hi guys! I decided to start my first portable project based on PS2. The first stage was to get some PS2s and select what to be used. I decide to use that: This is a SCPH79006 with the GH-061-42 mainboard: As you can see I started to remove some components that are out of the trimm...

Hello, after my first great experience in the portabilization of console (O-Wii), I really want to make a portable PS2 ! So here is my worklog :D Here are the ideas that I think to integrate : Custom buttons PCBs with PS2+ on it + RGB led, power button, L1 + R1 (and maybe U-Amp on one side)...

Guys, can someone help me with a capasitor? i try to make own ps2p, but i broke my capasitor (it gone away), and now i want to solder in new one, but i can't identify old. it seems like 100pf 50v 1005 NPO (similar to the scph 70000 mb, but i dont know yet). My motherboard 79000 GM-62-02. Thx in...

Hey guys, Anyone willing to get rid of their ps2p and n64p, i have both consoles and im willing to give em to you with payment in exchange for the portables, as long as both have the ability to use original cartridge/disk and are able to use 4 controllers aswell as tv play as i frequently have...

Hi since I changed the model I wanted to know the power button and the reset where I could connect it on a model scph 90004 please help me. :( I wanted to know if this switch scheme is okay obviously and a ps2 slim is also okay for a super slim?

Good evening hi this is my first time that I design a portable ps2, to be premised that I want to make a portable ps2 on a model scph 79004 so that I can make a cut to the motherboard and make it smaller, for the moment for experiment I have a card ps2 obviously not the scph 79004 model to...

Hi All, I have decided I really want to have a go at creating my own Portable PS2. Unfortunately I do not have too much electronics experience, I only know the basics really. I also know this is a massive task for someone with my knowledge but I love a challenge! Now, the problem is I don't...

Uncertain what I'm going to title this project, so for now it's just a PS2 thing. I've never had a whole lot of drive to do a PS2 portable, just because I've never had any interest in the games for it. I bought a 79001 off of eBay shortly after Gman released the PS2 trimming guide, but it has...

Hello everyone, In this worklog, I'll be working on a project called the Ps2 classic. As the name indicates, It's going to be a mini version of the PS2 slim, just like the PS classic. It's a project that has been on my mind ever since i saw wesk's Noob Cube. Im not yet sure about the trim yet...

Hello everyone, This is my first guide for this community. A small introduction into game loading methods of the ps2. There are 3 loading methods for the ps2: USB method. HDD method. SMB method. Usually, people opt to the USB method because of its simplicity, all you need to do is connect a...

Hello everyone! I'd like to present to you my Playstation shield!(took a while to come up with that name) It's a Playstation 2 portable with the advanced trim and relocation! Here are the specs: Playstation 2 SCPH-79003 board advance trimmed. 5" VGA Screen with an option to switch to AV to...

Hello everyone, I'd like to introduce you to my new playstation 2 portable that i've been cooking up for a while. I didn't even name it yet, but it'll probably be some generic one. Anyways, Welcome! With this playstation 2 project, it will have full compatibility, meaning any game that runs...

Hey, absolute beginner here! I want to build a PS2 portable (from a SCPH-75004), but I have some concerns. I'm looking to slowly work my way into portablizing the console, starting with making it independent from wall power. Now what I need to know is, how would I exactly do this? I know I'd...

Greetings people, i hope your good. Today I searched to see if I could give me a hand with this that happened to me about a week ago... my nephew had a PS2 Slim, he take it to repair and also mod it (I'm not sure that's how it's written), to play pirate games, and after 2 months, the guy...

Hello! Welcome to my PlayStation 2 laptop worklog, The reason behind this particular project is because of the PS2 model i have, SCPH-90004, It has a bigger motherboard than the usual 790001, Beside that, The Composite for some reason really shows a good picture and components cable doesnt work...

I currently am working on improving my PlayStation 2 portable and I would like to be able to use a microcontroller instead of using a ps2 controller. I have a teensy 3.2 that I was hoping to use instead. Is there was any way to program this microcontroller to output what is needed to make a...

hello, could someone help me? I have a ps2 fat scph50011 with motherboard gh26. I've had it for a long time, but about 5 years ago I stopped using it for lack of time. A few months ago I tried to use it again, but when I turned it on the image looked bad, so I restarted it but took out a spark...

So it's finally time to post this project in this section I believe. It's been quite a while since I started this project and it kind of evolve over the years. From thinking of using DVD drive all the way back in 2013 to looking into obscure hard drive setup for the slim, experimenting with...

Hello all, I finally feel that the Ps2+ is in a state that I can release to the public. The open-source project is located here: https://github.com/mcranford13/Ps2Plus. This project is meant to replace the PS2 Dualshock controllers and hopefully open the way for more ps2 portables. There has...