power delivery

  1. Minystreem

    Reusing power mangment compents on the wii?

    I don't have a very big budget for my portable I want to build, so insted of paying a bunch of money for the power mangament circut, is it possable to reuse the compenents already on the wii? If so, how would I go about doing this?
  2. Bubberiffic

    Solved RVL-PMS Lite vs. RVL-PMS-2

    The RVL-PMS-2 just restocked on 4layertech, but before that I was just going to go with the RVL-PMS-Lite, I don't care about perfect battery life indication and the one with voltage is fine for me on the Lite version. The only other thing is the LDO on the Wii would be used instead; how...
  3. Bubberiffic

    Solved Question About RVL-PMS-LITE Wiring - See Diagram

    I am getting into making Wii portables and this is my frist one. I've been hard at work studying where to solder certain wires and more. I was just wondering, in terms of power wiring, is this correct? - Or is there some small mistakes, etc. Please let me know and I appretaite any support! I...
  4. Okiguess

    Question direct power

    Hello, i was wondering if you could power the entire wii motherboard dierctly (without trimming) to see if it works. do i solder wires to the place were the input is or where you solder the batteriest after trimming. Please help!
  5. Imicoz

    Question U10 relocation and power supply regulation

    Hi! I have tried for a few days now to get my wii to work after being trimmed. Stupid as I was, I trimmed it before moving U10, so I don't know if that is the problem or not. I managed to desolder it losing only one leg, and that leg being one of the ground legs (the ones on the side with 3...
  6. vikMKW

    Question Custom charge and play PCB

    My goal is to achieve automatic & continuous charge and play when an external PSU is connected. I’ve been digging up peoples’ solutions, and there are some sophisticated ones (i.e. USB-C PD)! I’d like to implement a simpler solution using dedicated Power Path ICs. Since what I want is...
Top