portable

Just making it official now, it took me days to find a name for this project (Thanks @JacksonS for taking the name WiiSP, without even building a clam-shell :P).. Planned Specs: - Wii: LM420 - Controller: GC+ (Thanks @Aurelio & @BocuD ) - DS Slider, Speakers & Buttons - Display: 5" 4:3...

I completely forgot to upload these haha. My bad. These are the models I used in the final version of my Wii S Lite portable. They fit an Intec DS Lite carrying case (not the DSi case) for any advanced modders interested in using the same case. Special thanks go to @Aurelio for modelling the...

Hi BitBuilt I'm currently working on my first Nintendo Wii portable. I've been interested in portablizing a system for a long time but never had the tools, or the understanding, on how everything works. Recently a good friend of mine @Jefflongo.724 built his beautiful Wii portable that inspired...

Name is a wip. Been a lurker for couple of weeks now and i been pretty stoked to make my own portable. I been pretty obsessed with the switch's tabletop mode, so i wanted to make a tabletop wii portable. This means no controller on the actual system itself, instead using external gamecube...

ok so I’m building my own Raspberry Pi console based on the design of a Nintendo Switch (features include a controller that is split into two parts and con connect to each other or the console, a dock for easy charging and HDMI out, and a Raspberry Pi running retro Pi.) First off let me...

Introduction This guide and its graphics were created by me, to the best of my knowledge and certain. But without guarantee of correctness! (Even if everything has been tested by me)! So make sure that you know what you are doing, as I will not be responsible for any damage or harm you might do...

IT IS FINISHED! Took phekkin long enough, but it's finally done. Huge thanks to Aurelio for saving my ass on several occasions. The Liinx features: A modified Atari Lynx 2 case Official Gamecube buttons and sticks with bootleg PS1 controller dual tact triggers A GC+ from the BitBuilt store...

So I'm trying my hand a portable wii. Heres the goal list: Thinner than the original wii Tablet form factor (with a stand) No disk drive (USB Games) Sensor Bar compatibility w/ original wiimote All 4 gamecube ports and 1 Gamecube card slot Headphone Jack Large, loud stereo speakers Big screen...

Ey B0is. The plan: -internal gc controller -wifi -frankencase (laptop 'cause they're awesome) -usb slots -sd card slot (mostly for brawl mods\ctgpr) -bluetooth -pth08080 regulator system -one of those 50/50 on actually working on arrival cheap chinese screens (mine works) -4 18650s -internal...

I've been putting off posting this thread because I wanted to make sure there were no issues before I say it's done. After a lot of closing the case and reopening it, all the issues are ironed out. It's done. Worklog Features OMGWTF trimmed Wii motherboard Custom 3D printed case 7.4v 6800mAh...

So I was taking stock of the carnage on my workbench after the last PS2 portable when I started thinking about a project I'd been tinkering with, which was a Raspberry Pi portable inside a Wii U. See I'd collected most of the stuff to do it, I had the screen, and the external phone charger I...

So I've asked for a little help pertaining to the PS2 portable that I've just finished, and it was suggested that I post here :) Technically this isn't my first PS2 portable, but a re-case of one that went horribly wrong along the way, complete with hardware failures, faulty components, months...

I wanted to know if anybody would be willing to build a portable GameCube for me. I have a GameCube with cables and 2 controllers that I can send. I don’t know what’s possible but if it can be near pocketsized and without a disc drive (I’d like to have the games loadable through an SD card) that...

I should be onto my second PS2 portable by now, but couldn't leave well enough alone and decided to open up the first one I had made and do some improvements. First up: a much better frankencase, second: a better audio amp so the sound wasn't so scratchy. Thing is that now I just cannot get...

I have no clue what I'm doing... Things I'm going to try to have in the portable: 5" Screen (With a touch panel that acts as the Wiimote pointer) 4 18650 Lithium-ion batteries buttons from a ds lite and other controllers 3ds slider 3D Printed case Charge & Play Internal Wimote IR leds and GC...

So, Doing' a re haul, I'm not using the dmg concept anymore, because i'm using it for the Kuesa, which seems like a better fit for the Concept/layout. While Waiting for Stuff for the Kuesa, I've been working on this boi(this might even become my Submission because I have more stuff for it than...

Although I hate having multiple projects going at once, I need some parts in order to continue my PNP console but I’m currently saving cash for Christmas, so I wanted to switch to something I already had parts on hand for. My only completed 64p to date is the Luma 64, a portable that, while I...

Essentially I’m asking exactly what the title says. I really want a Portable Gamecube or Wii, and I don’t know where to get one. Would someone sell one to me? Is there a place or person to buy one from? I want one that has battery life (doesn’t need to be plugged in to play), and I don’t care...

Hello, I have an internal 4 cell 18650 battery pack in my portable, I was wondering the best way to unify them so that they are all charged and regulated from one charge input, and then have a cumulative battery output voltage. I was looking at this board here but I am unsure which points to...

I am completely inexperienced working with batteries and making them, I want to be as cheap as possible with my Wii Portable build, and have a relatively small battery pack. If someone who knows more about this could help me out, It'd be very appreciated. What I need to know: What's the most...