• Ordering from the BitBuilt Store will be disabled until sometime next week. We apologize for the inconvience!

playstation 2

  1. MomSpaghetti

    Worklog PS2 CLASSIC!

    Hello everyone, In this worklog, I'll be working on a project called the Ps2 classic. As the name indicates, It's going to be a mini version of the PS2 slim, just like the PS classic. It's a project that has been on my mind ever since i saw wesk's Noob Cube. Im not yet sure about the trim yet...
  2. MomSpaghetti

    The Playstation Shield!

    Hello everyone! I'd like to present to you my Playstation shield!(took a while to come up with that name) It's a Playstation 2 portable with the advanced trim and relocation! Here are the specs: Playstation 2 SCPH-79003 board advance trimmed. 5" VGA Screen with an option to switch to AV to...
  3. MomSpaghetti

    Worklog Spaghetti's Playstation Shield portable!

    Hello everyone, I'd like to introduce you to my new playstation 2 portable that i've been cooking up for a while. I didn't even name it yet, but it'll probably be some generic one. Anyways, Welcome! With this playstation 2 project, it will have full compatibility, meaning any game that runs...
  4. NahuelFlores

    Question PS2 audio/video wiring

    Well, it may seem obvious, because they already detailed it in the definitive PS2 trimming guide, but I need help. I have a PS2 SCPH-90010, and my idea was to connect the AV to the monitor and the audio normally, but I want to solder the wiring av directly to the board, that is, disarm the cable...
  5. NahuelFlores

    Question Is this battery scheme well structured?

    Hello! As you saw in the title, I need help with this battery scheme. I need you to confirm your is well structured. To consider; each battery of the following scheme will be in an individual battery compartment. The batteries will be charged with a specific battery charger, so you will have to...
  6. Terrapaws

    Question PS2 Does not boot

    So I have just received a ps2 model 79001(the mobo layout is more like 79003 however). I applied DC power of 8.5v to the positive pin of the barrel jack and the negative to a ground near a mounting hole on the motherboard. So far I have been unable to get even an a red standby LED to show. I've...
  7. Worklog My First PS2 Portable

    Hello everyone and welcome to my first ever work log! I am making my very first PS2 Portable and uploading my progress to YouTube and on this work log. I have most of my parts so far but am waiting for others. Special thanks to MRKane and Dominatory for helping me out in my question thread...
  8. MRKane

    PS2 controller PCB files

    Hello all, So typically I've finished my PS2p and was left thinking "I wish the insides were cleaner" and then had a crazy idea that'd require me to make my own PCB for handling the controller to come up with a solution. Simple question: -Are there any PCB files for the PS2 controller freely...
  9. MRKane

    Worklog PiiStationU Portable

    So I was taking stock of the carnage on my workbench after the last PS2 portable when I started thinking about a project I'd been tinkering with, which was a Raspberry Pi portable inside a Wii U. See I'd collected most of the stuff to do it, I had the screen, and the external phone charger I...
  10. MRKane

    PS2 Portable As Cheap As Possible

    So I've asked for a little help pertaining to the PS2 portable that I've just finished, and it was suggested that I post here :) Technically this isn't my first PS2 portable, but a re-case of one that went horribly wrong along the way, complete with hardware failures, faulty components, months...
  11. MRKane

    PS2 Portable Assorted Issues

    I should be onto my second PS2 portable by now, but couldn't leave well enough alone and decided to open up the first one I had made and do some improvements. First up: a much better frankencase, second: a better audio amp so the sound wasn't so scratchy. Thing is that now I just cannot get...
Top