n64

Hi guys, i made this 2 years ago but long story short, here it is ;) : I had this idea to create something that can be easy improved, without the need to redesign the whole thing so the modular n64 was born, it has removable joysticks (they can be changed, can accept later functions, can share...

There is a very slight difference with the NUS-RMC-10 expansion pak found in PAL regions. This variant although listing 36 pins only has 35, Pin 1 does not exist. Black = Ground Yellow = Common component connection Cyan = NC Red = Common Connection This data was put together using...

Well I finally trimmed and got a board to boot for an N64 so I figured might as well enter the competition and make a forum post. Specs: N64 with Expansion Pack 3.5" composite screen Horipad Retrobit remake controller Uamp Audio 3d Printed case(Transparent Ice Blue) This is a basic layout on...

I've been working on designing my own PCB for an N64 controller for a little bit now, similar idea to the famous RDC chip that Downing uses in his portables. I know there is an N64+ controller chip coming soon thanks to the great work of some of the folks on these forums, but I'm using this as...

Hello! I've been looking for a console modder to comission for a custom console. The vague concept: Basically a trimmed Wii + trimmed N64. Why: The Wii can run most older consoles well with emulation, however the N64 emulation is still struggling. Considering that me and my friends still play...

Hello, Here's my newest Nintendo 64 portable, an improved version of the last GameBoy64 based on the feedback i received. Specs: Nintendo 64 REV 04 2x 18650 panasonic 3400mAh (2:30 to 3 hours of gameplay). 5" LCD TFT screen.(Composite signal). 1st party N64 controller with Gamecube-Style...

Hello everyone, This worklog is about the GameBoy 64 Worklog. Based on the feedback i received, i had to change few things as well as some small problems that were bugging me, here are the changes: 1- I tweaked the design because of the feedback i received. 2- The case finishing is the reason...

Hey! Welcome to my 1st(Successful) portable Nintendo 64 Console called the Gameboy 64! It was named like that because of how it's handled like a gameboy advance! I worked on this unit for 3-4 weeks to finish including the case design and everything, but didn't want to post a worklog until i...

Hello everyone, I've been making a n64 portable lately and im in the stage of pre-trim, I have a problem of no audio. i made a picture using paint below, I'm using the PAM8803 mini Class D amp. with 2x 8Ohm speakers. Are my connections right? Or is it the fact that the 8Ohm speakers are...

I’m building an N64 portable and have been researching/collecting parts for the build based on the BOM and various threads posted here. For video, I’ve settled on the 5” ZJ050NA-08C using the KYV-N2 V6 driver board. Before I order the display I wanted to confirm it will work with my power plan...

So, I am starting to make my first portable called the Nintendo 60C0r3. (name (not???) final) My materials are: N64 (duh) Padarsey 5 Inch LCD Screen Magnet Wire (What specific wire do I need for system/batteries/charging jack? And is speaker wire too overkill?) 480p(?) Graphics Perfect Input...

So I started work on my N64P (yet to be named). Its been slow going, but I'm making a bit of progress each day. I've ordered/found (most of) my parts and so far I've only broken down the board. In the pic, I've marked (a tiny bit of) where I'm going to cut. But I want to get the cart relocation...

Article: https://mspoweruser.com/hyperkins-ultra-retron-is-a-nintendo-64-for-modern-tvs/ Teaser video: MVG thoughts: So, from what we already know, is that it isn't using a hybrid of software and original hardware, but instead going full emulator with the Mupen64Plus Next Core. NOAC's have...

Hi all! This is my first attempt on building a N64 portable, I just got the console I bought from an Ebay like site in my country. When I opened it, I noticed this very hideous soldered board to the main metal plate, and since this is my very first time opening a N64, I couldn't stop but wonder...

Hihi everyone, So, Im designing my portable 64 and doing my research as I go. Ive picked a screen that I want to order, so that's covered. However... I have a Coby Kyros tablet just wasting away over here... so I have a couple questions. 1)Can I use its screen theoretically? 2)Is it ok to use...

I did a thing.. Need to go to barcade, will update later. >:)

For my first post here I am going to post some pictures and the super cringey video of my first portable system that I built way back in 2015 but was STARTED in 2011. I had absolutely no idea what it was I had gotten myself into, and so eventually, after I grew up a bit and took a break, i got...

Hello BB members I'm back again to do another N64P The parts ill be using: Gba carrying case 7.4v 5600mah 4.3 Tft screen 1st party controller Memory card 16 Ohm speakers Expansion pack Gikfun tact switch I'm already starting to get the screen prepared to the way I want it

I would like to introduce you today a second N64 portable (the first was so awful that I would not put it here: D) It was my first 3d drawing and first 3d print I just bought a 3d printer (Prusa MK3). Now the portablize addiction has grabbed me and I'm just at the WII This Forum is so awesome...

Hello guys and gals, I'm TheGreenPowerRanger though you can refer to me as green for convenience sake. Even though I have been following the portabilizing scene for 5 years I am just now getting the confidence to make a true, full blown attempt at a portable so go easy on me pls. I have had a...