help

This is my first time posting sorry for anything wrong. I trimmed my 6 layer Wii and relocated the U9 chip because my U10 broke. The 1.15v, 1v and 1.8v lines are all reading as continuous to ground. 3.3v is not reading as continuous but has low resistance. What do I do to fix this. The gray...

so, I cut my wii, used tape and everything, cleaned off all the dust I could see, carefully soldered the tested and working regs to the caps, connected my screen and nothing. I made sure there was power to the console, connected my audio amp, checked for any shorts, and still nothing. Any...

ey bois so, I'm making a battery pack with 18650s and I'm pretty sure I hooked 'em up right, as my mini chinese LED display rates the batteries at 8.06V (confirmed working from my old pack). But for whatever reason, my batteries won't charge. After reconnecting the the b- to b-, and the b+ to...

Hello, So my Wii has this wierd issue that whenever I boot it up. It will boot but after a while it will Auto-Reset. Once it has Reset, the unit will reset again after X-time. These intvervals become shorter and shorter untill after a while the Wii just keeps resetting whenever PM has booted...

Just to preface, I’m such a noob at this stuff I don’t even know what most of the terms mean. I’ve been researching for about a month now, looking for info, a guide, or even a finished product where an N64 and a projector have been put in one case. I’ve found many handheld versions, and even...

So I recently started on a Wii portable, I did a U10 relocation, and it was successful, tried to do Bluetooth and got it all hooked up to the best of my knowledge tested all connections and voltages three times. But I still can't get it to work, can someone help me with this please. The Wii...

Ive always wanted to own an actual portable n64 and Its been a 5+ year dream of mine to build my own. With that said I never started it because I was afraid I would kill something but I realize I’ll never achieve my goal if I dont start. I have been slowly acquiring parts for cheap and think im...

I kinda of broke my U-10...and U-9...in my first attempt at relocating. Both had their two legs chopped off..im thinking too much heat...I since then figured out the correct way to do it, but thus I still need another one..if anyone has a spare from one of their boards I could buy let me know...

Ey B0is. The plan: -internal gc controller -wifi -frankencase (laptop 'cause they're awesome) -usb slots -sd card slot (mostly for brawl mods\ctgpr) -bluetooth -pth08080 regulator system -one of those 50/50 on actually working on arrival cheap chinese screens (mine works) -4 18650s -internal...

Yo wuss poppin. For my portable gc, I made a 14.8v. Battery pack with those amazing ncr18650 batteries (cancelled because wii is infinitely better) I used a tenergy smart charger and their 32010 protection circuit for a 14.8v pack. Now that I need to use a custom regulator, I want to make a...

Hi, how are you? I want to create a ps2 portable, but I'm new and I don't know a lot of how to cut the motherboard, I would like if someone could help me. Here there are some photos of my ps2 motherboard

hey, im new here and would like some help with designing and building my own n64 portable, and I would reeeeaally appreciate it if someone were to give a general BOM (bill of materials) or design concepts IF POSSIBLE. I would really appreciate it and have a nice day! ;)

First let me say I'm not here to offend or tarnish a reputation or anything like that. I love this community along with all the genius minds and don't want to put anyone down. I would just like to know if anyone here has bought parts from BadAssConsoles.com and if they received their order? I...

Alright so I am extremely new to the scene and just had a quick question about case making. Which method is better and if it is better why and what are the differences/pros/cons. Vacuum forming or 3D Printing? Also if I were to 3d print would this be a good printer to use...

Hey guys, I decided to continue with the Nintendo Swiitch. If I finish it in time I will post it as a contest entry, but I'm not sure if ill be able to finish it in time. Also, I created a new thread for this so you can find it without reading trough the entire worklog (if someone else has...

Basically that, Im taking apart a gameboy for the first time and there are 4 infernal screws there. They are evil! Even more evil than The Four Dark Devas Of Destruction! One of them is not + anymore, its O, yep. I cant get them out. Any ideas?

okay, so I've been following along with the wii trimming guide (except for the trimming part), but when I tried soldering the video wires straight to the wii motherboard there was no video output. The screen didn't even recieve a signal! Here are some pictures (above)

Hello, I really want to start with my wii portable and i have almost all of the parts now (wii, cpu-50) GC+ (thanks, Aurelio!) and screen, batteries, regulators, basically everything. But the wii i got was secondhand (obviously) and the previous owner modded it at 4.1e and then formatted it. The...

Hi there, I'm new here and could use your help and expertise. My background is in mechanical engineering and design, so electronics are a bit flummoxing beyond simple wiring. BUT I got it in my head to turn this N64 carcass I found in a bin into a portable with a custom, hardwood housing. I got...

Hey everyone, If anyone needs help with any design for avatars / custom themes (for Portablize Mii)/ any of that, I'll very happily put something together for you (for free obviously). My actual drawing skills are horrible. But I would like to say I'm "Pretty Good" When it comes to drawing...