help

When looking at both, I don't know why I would use the PTH08080 when it looks like the PTR08060 can output a higher amperage while only needing the same base input power, meaning both can be powered off of 7.4V. It looks like the 08080 has a higher max input voltage (18V vs. the 08060's 14V)...

Hey peeps, so I recently went back to a project I had shelved that was almost complete, but suffered a technical issue I couldn't easily bypass so I gave up, sadly after looking back at it, I realised the switch mobo is damaged from storage and cant really be saved, so I am going to start fresh...

While performing the OM6 trim for this 6 layer RVL-CPU-30 unit I accidently shot out with my dremel and it removed some solder mask and what looks like a few traces at this part of the board. All traces on the back including the RAM (?) chip are still completely intact. Will the board still...

I have connected the usb-c PCB, RVL power management system, Wii to each other and connected video to a screen, but the Wii does not boot up and the RGB led doesn’t turn on when I press the power button. Whenever I remove the 1.8v line from the Wii though it seems to power on because the RGB led...

For my portable I would like to do a Omgwtf trim for the Wii motherboard, however I need a smaller trim, and I don't think I'm skilled enough to do a Lmao or a Lmaov2. Is it possible to make the Omgwtf trim close to the size of a Lmaov2 trim?

Here’s a Wii I will be using to make the G Boy Wii portable. I just bought this on eBay and the seller said that the system has a broken disc drive but works and boots into the menu. But when I power it on it only shows a black screen. I tried using a different composite and component cable, I...

I started the trim yesterday and haven't done anything besides the cut. While I was doing that a part of my motherboards traces on the edge got cut and I am not sure if it is necessary or unimportant. I will include a picture but I am not sure if I should start again or keep going. Any...

Hi all, I really need some help i dont understand why the VGA patch is not working for me :rothink: I have plan to use VGA on my O-Wii, but after installing BBloader and activate the VGA nothing apears O.o I have tried many times to make it work, I have checked my connections several times, the...

first thread! This is gonna be a worklog for the Wii Micro I am going to be building. A lot is still under construction and very rough but I just wanted to start a thread so I can organize a lot of the info I'm writing. I hope to build a Wii Micro with a similar design to Jeff's or Gman's Wii...

Recently I acquired a gamecube and various components to mod it with. The Xeno chip is very straightforward, and the SD2SP2 mod chip plugs right in. I am having some difficulty finding install documentation on the Pluto-IIx HDMI soldering points. I already have GC-Video in the modchip, so I...

Hello everyone just got all the tools and boards to start my ps2 portable, the thing is that just for troubleshooting tried trimming the 2nd usb port and removing the digital output of the board. Now it does not show anything on the screen, but the board powers on just fine. Did i just killed...

Hiya BitBuilt peeps! I have a question regarding LCD screens for portables. Mainly seeing if there is a guide out there on this subject and if someone could assist. If I buy a screen, I would also need a board that has all the components that I would need as well correct? Such as audio video...

I'm not sure if this is allowed to be posted so correct me if I should delete it, but I was on the bus and my GBC spontaneously stopped working. I've checked the batteries, and used an acid brush with isopropyl alcohol to get corrosion off the contacts. (I got it from a friend that said pay...

Heyo, I was wonder what the deal is with Bluetooth relocation, as I would like to play Wii games on my first portable. But the Bluetooth relocation seems redundant if you could hypothetically insert a USB Bluetooth adapter and connect a Wii remote? Same goes for wifi... The only reason I don't...

So, a while ago I've decided to make a portable wii, I'm naming it the Portiblii! and I need help with its internals. I'm going to order some 18650 3-6Ah batteries wired in 4P (with internal protection because safety first), a 5" AV display, boost converter and buck converters for the power...

(Please excuse my profanity)Ok so stupid as question buuuuttt... HOW THE FUCK DO I START?! IVE SEARCHED FOR EONS AND I CANT FIND A DEFINITIVE ANSWER TO HOW TO START MAKING A PORTABLE WII!!!. I know about about portabalize mii and all the usb and micro sd stuff (except for hooking up the display...

Hey! So I checked out the wii trimming guide and have a general idea of how to make a wii portable (looked at a work log) but some forums about the specifics of certain parts of the process (mainly wiring and where everything connects to) would be useful as I have very little electronic...

Hi. This is my first Wii portable and its more like a wii laptop really. I just looking for advice on what battery I should use to power the wii, the screen powers itself so thats taken care of. I've been doing some reading and most people use Li-ion cells to power Wii's but I've never used...

Well, it may seem obvious, because they already detailed it in the definitive PS2 trimming guide, but I need help. I have a PS2 SCPH-90010, and my idea was to connect the AV to the monitor and the audio normally, but I want to solder the wiring av directly to the board, that is, disarm the cable...

Hey I am new to this and I have been researching and looking around at articles and videos about PS2 Portables. I just need help choosing the best parts e.g. batteries and screen, and how to actually build it. My PS2 model is the SCHP-70002. I only have the PS2, a controller, and output cords to...