gamecube

So this is my first Wii trim and case design. I figured i'd start out with a rather simple mod before moving on to a portable. THE GOAL: To create a case that is simple to print and assemble. To reuse a decent amount of Wii components and screws. Small enough to be cute but retain...

I’ve never done any hard modding, mostly soft modding and homebrew stuff. I want to make a portable out of my GameCube as, I would like to keep my Wii for home use. Does anyone have any guides for this, as well as an estimated cost, as I probably do not have all the equipment needed.

I'm looking for a wii board that still has Bluetooth (I have senor bar), as well as one memory card (wire, I can provide the spare slotting) and (wiring for) gamecube controllers, as well as the custom regulators pre-made and wired up If you have such a board, or at least a trimmed down one...

Hey BB! @Postman and I have been hard at work in the Mod Station cooking up new memes for all the goodbois! This one is a twist on a twist on hotdogs. :rothink: I found a Raspberry Pi case online that looks like a mini GC, someone then modified it for a SBC to emulate GC. The modified version...

Is there any way to buy a Portable GameCube??? Does not matter if it has Wii games.

Hi, I'm nitroboy on discord so I decided to make a worklog : This minigcwii will entirely be in that case Which I think is pretty small, see the wii2hdmi as a reference. Features: - Bluetooth [✓] - Hdmi output [✓] - Composite output in a headphone jack [ ] - Mx chip, without battery [ ] - IR...

Just finished these puppies up this morning :D The face buttons are laser etched and resin cast, not painted, and the joystick caps are from a Gamecube controller. Here's my video on them. If you want to do your own joysticks, here's how I did mine. The silicon on the left joystick fits...

Okay, okay, it's not really a Gamecube, it's a wii. The idea of having a mini Gamecube has been around for quite a while, and once I even went so far as to see how small a gc motherboard could be while keeping it to scale. Obviously I'm glad I didn't make it because I discovered this wonderful...

Hey guys! It's finally time to start a worklog for this project as I finally know it's 100% doable. As some of you may know, I recently began playing with silicon molds. So far, I have made molds for a few different types of buttons, but the ones I'm most excited about are my 3ds buttons. I have...

Hi! I am building a wii portable and would love a GC+ for my build. Does anyone have one for sale? Thanks, Joe

Hi, I am interested in buying a Megadrive v5. It is out of stock on badass consoles and I am going to need one for my next portable. Does anyone have any for sale? Thanks, Joe

I asked this question in another thread I started a while ago and got no answer, so thought it might be useful to have it in it's own thread. This is the pinout for the Wii's Disc Drive. This is the pinout of the GameCube's disk drive connector. Would all I have to is connect the Wii...

Hello! Thanks to this forum I have been making great progress and I am feeling more confident in completing this seemingly impossible Gamecube Portable project! However, one question that still troubles me is the choice of battery. I am thinking of keeping everything 12V to ensure stability...

Hey guys! I've had this project in mind for quite some time, and finally got around to doing it. A while back, I discovered that the black jewel on top of the 001 model Gamecube is actually two pieces of plastic glued together. After separating them, I had the idea to replace the "Nintendo...

I'm new to this, but I think I understand it in concept. I just need some advice on how to go about doing this. Any and all advice one rewiring the buttons and joysticks is greatly appreciated!

Hi, So, I have been continuing on my journey to build my portable Gamecube and have been searching for screens to use in my portable. I want something that is pretty big (5-6 inches or so) and of course native 480p. I have been looking around and found this on ebay. Could I use this? Or is...

Hi! These past couple months I have been designing and building a gamecube portable. There are many things that need to be worked on and an enclosure for my project is no exception. I have access to a 3D Printer and CAD software, but I don't have a 3D scanner to scan the controller to get the...

Hi! So I've started work on a GCP and wanted to ask a couple of questions! 1. I have a DOL-101 Motherboard, can I directly plug in a 12v battery or do I need to step the voltage down to 11.1v? If so, how do I do that? What's the easiest and safest way, because I'm not that experienced yet :D...

Name is a wip. Been a lurker for couple of weeks now and i been pretty stoked to make my own portable. I been pretty obsessed with the switch's tabletop mode, so i wanted to make a tabletop wii portable. This means no controller on the actual system itself, instead using external gamecube...

Hi! I'm new to portablizing and BitBuilt! I haven't done anything yet but only been studying things and how I would do it. One problem I keep running into is how will I load games onto the Gamecube. One option would be the normal Gamecube disc drive but it's kind of bulky but the easiest one to...