first wii portable

Ok! I had an idea last night, and i have no idea whether or not this is a good idea, and so i am posting it here to see how everyone else feels about a portable like this. The Legend of Zelda is one of my favorite game series. And so i have decided that for my first project, i am hopefully going...

Here’s my finished Ashida! After giving up on this project last August, I persevered to complete it! Special thanks to CrazyGadget for helping me with VGA & other issues last year, and for encouraging me to finish! The case is 3D printed on an FDM printer and I sanded, filled, and painted it...

I have these added to the cart. I read the description under the pcb's to try and understand what each one does, but I feel like some of the pieces (ie the replacement heat monitor L chip) are redundant, and I don't really wanna waste money, so is this all I need to make the ashida work? (I have...

I've ordered all the parts except for the 4layertech stuff as i have to make sure i got enough money before getting it. My vision is a wii-themed ashida, and i made a decal to put on the back (attached). I also made a Pikmin RVLoader theme if you're interested in it. I've wanted to make a wii...

Okay, after more than a year, I can finally start working on a wii portable. I found out about bitbuilt last summer and was shocked to discover what some people could do with my childhood console. first time I opened bitbuilt, I found the ultrawii sakura of @YveltalGriffin and wanted to do my...

Hello all, I've committed myself to building an Ashida as my first and probably only portable build and so here we are. What I've done already: 3D Printed the Case Needs sanding (badly) Chopped a Wii Took more sanding than I expected to get acceptable resistance values but should be...

For the last few weeks, I've gotten really interested in making a Portable Wii, and after a bit of time, I have accumulated to what I think is all of the parts and tools that I would need for a Portable Wii, including the boards from 4LayerTech and the Custom PCBs. I have decided to go for a...

Greetings. I recently been working on the G BOY Rev 3 project I picked back up on. Unfortunately my friend accidentally spilled a little expoxy on the left side of the PCB. The right shoulder button tac switch was jammed and after removing it with a hot air iron, the button is still useless. Is...

This is where I'll keep my worklog for my Ashida project, which has just started ramping up speed. Software is all setup on a 128 gb micro sd, and all 4LayerTech boards have been ordered (spare the screen). While I await their arrival I will be getting practice on my Soldering Iron and Heat...

I'm getting back to my first Wii Portable Project I started almost a year ago during my college break. This is a Wii trimmed and rewired based on the OMG-WTF trim method. It's been heavily sanded using 600-1000 Grit Sandpaper but I haven't wired this up to power yet, but before I do so I want...

As the title makes obvious, i need a 6 to 6.2 inch (preferably good quality) screen for my upcoming first wii portable. so, that's the size i'm going for, but i need that kind of connection, and hopefully, not too expensive, ($50 or less hopefully). Any help is appreciated, Thanks!

Hey guys! I figured I should start a worklog, mainly because I have a feeling it will help keep me motivated despite things going horribly wrong! And so begins the Sandwiich, named after its similar form factor to a Maxibon ice cream sandwich. Here is the feature list: OMGWTF Trim with MX...

Hey Bitbuilt! I have been working on my portable Wii, trying to just confirm the trim is working and I can't seem to get any video output... I'll list the measurements I took below, along with photos. --------- Input to Regulators: 7.4V 1v line - 0.9949 1.15v line - 1.1168 3.3v line - 3.348...

Hello, I'v been doing some research lately and wanted to try a shot on my own. I ordered three japanese wiis and managed to region change two of them. The third one has system version 1.0 on it. That's why I'm not able to softmodd it :(. I still have 2 tries and 3 Hardware components of...

I feel like it's about time I start a worklog, I've been putting it off for a bit. I've gotten almost all of the parts I need, i'm just missing the case and audio amp (sort of). I recently trimmed my Wii and relocated bluetooth/A10 (i'll attach photos) Theres a few things i'm unsure of, I...

Hi! New here. Sorry for being so cliche with the title. So i want to start making a portable because it seems cool. I have experience soldering and with other electronics, but not much on this scale (i also need to buy a soldering iron of my own, so waiting on that.) Luckily, I have a 4 layer...

I have built a GC portable I am now going to attempt to build a Wii portable - untrimmed Wii (unfortunately I couldn't get portibilizemii to work, bricked 2 Wii trying) so now I can't trim, I may trim just the ground bars across the board to make room in my case - wiimote - "5 tft back up...