ashida

After years of modding Gameboys and staring longingly at portabilized consoles, I've decided to take the plunge and build an Ashida for myself. I've spent the past weeks reading the forums and gathering parts, and I've already put a significant dent into things, though the hard work is all ahead...

I am building an Ashida portable and I don't know what tools and extra parts not listed on 4 layer tech to buy. Please recommend things to remove soldering as well as a soldering iron and other important tools/pieces.

I’m starting my first wii portable (The Ashida) and I’ve looked through the guide a bit on trimming the wii motherboard. (which arrives in a few days) Any tips for beginners or any specific videos in the electronics 101 collection that would be useful. Since I’m a total newbie when it comes to...

It is a portable wii that looks (a bit) like a book from he outside but inside it is your typical folding wii portable. Here is a pic. should i build this (im a beginner to the modding community) or should i start with an ashida or a simpler one like that?

Hey guys, I'm having trouble getting the audio to work properly on my Ashida. I'm using an RVL-AMP instead of a UAMP so I'm trying to figure out the differences and wire it to the interface board accordingly. I can take more detailed pictures, but everything is kind of packed in here already...

Hello, I'm currently building my portable Wii using the 4LAYER boards. I love the design and the idea of it but currently have a few issues in actually putting it together. I can currently get the screen to work but it starts in AV2 and I have to change the channel over manually shorting the...

I have a question as I am currently planning everything out as a beginner to build the Ashida Wii Portable. I am wondering where to get the shell 3d printed for good quality and extra tools I may need besides the essentials. I have a $750 budget for everything (I'm willing to spend some more on...

6/13/22 - Finally started work on my first portable the other day, and man was it fun. I got so wrapped up I almost forgot to write a worklog, so this is going to be a lot of stuff on the first post. First things first, the prep. I purchased a black Wii off of Ebay for around $30 usd total. It...

So ever since about September I have been hyperfixated on portables and console modding. Finally, here I am building my own. As for my first time doing this I have decided to build a Ashida. After a bunch of research I'm at 90% 80% 75% of understanding on how to build this. Anyways for my first...

Ashida Gunmetal Edition Introducing the Ashida Gunmetal Edition!!! Not perfect... but getting better at these portables! I still need to troubleshoot the Bluetooth after updating the firmware but I think I figured it out for the most part. Been playing this solid for a couple weeks! Now...

This is where I'll keep my worklog for my Ashida project, which has just started ramping up speed. Software is all setup on a 128 gb micro sd, and all 4LayerTech boards have been ordered (spare the screen). While I await their arrival I will be getting practice on my Soldering Iron and Heat...

I posted a question like this about The Ashida Portable so I figured it would be better to ask here. So what kind of wires would a beginner need for soldering things like the battery contacts, the speakers etc.

Hello, I've found this website to be very interesting and I enjoy all the ideas and ingenuity, so I decided to post a worklog of my Ashida build to share yet another build and, of course, have the ability to ask questions and get advice from the more experienced people here. I first saw the...

mods please delete thread

Just putting this here for easier locating in the future: Ashida 3d Print Files

Starting my Ashida worklog. Here we go! Huge thank you to @Wesk for creating such a cool portable design! And thank you to @Gman for printing again for me! And of course 4layertech for the PCBs! You guys rock. Original Thread from Wesk...

Hello, I am just about to order my parts for my own Ashida but there are a few things I need some clarification on. Also, I'm sorry if these are dumb questions I am still relatively new to console modding. -When using the u10 emulation from the RVL-PMS do I only have to remove the u5 chip and...

I want to start out by giving a huge should out to @Wesk and the 4LayerTech team for making all of this possible and accessible. When I first saw Wesk's Ashida, I knew instantly that I wanted to build one. It is truly a no-compromises portable. I decided to try FDM printing the case, to try out...

It's been a long time coming, but it's FINALLY my turn to make an Ashida! I'm hoping to have it done in time for MGC so I can show it off to the bois. My shell was printed in sla by The_Random_Guy and I truly couldn't be more grateful for him kindly selling it to me for an utter steal. While...

Hello all, I'm looking to get an Ashida case 3d printed in this filament. If you are interested, feel free to reply or contact me on discord. Thanks!