3d print

  1. Wesk

    Model Sega Nomad 3D Printable Shell

    Here lies my version of a 3D printable Nomad shell. Files contain both the front and the back as well as a dual speaker version. Additional parts can be found here: RetroGameRevivals These models are based off my 3D scans and have been cleaned up for 3D printing. I have made small adjustments...
  2. Revine

    Solved Louii Case Print

    Would Anyone be willing to 3D Print and ship me a Louii Case? I know PCBWay and JLCPCB are favorited but JLCPCB can't print the custom buttons that the Louii has, and PCBWay is a bit too expensive for my budget (around $60 minus shipping). As this is my first portable, I don't need something...
  3. Dynamic_Hayden

    Question What 3d printer is best for portable cases

    I'm getting tired of paying pcbway absorbent amounts for 3d prints so I think its finally time I get a 3d printer of my own. So I got some questions about 3d printers I hope you wont mind answering. -Which 3d printer should I get with no previous experiences 3d printing -Which filament...
  4. Wesk

    Model Ashida 3D Print Files

    Just putting this here for easier locating in the future: Ashida 3d Print Files
  5. Wesk

    Model Resin Printable Xbox Duke Joysticks

    The original Xbox "Duke" controller never got replacement or after-market joysticks, so I 3D scanned the joysticks and created new ones from scratch using the scans as a reference. These models aren't exactly identical to the originals but they are close enough that 99% of people will be happy...
  6. Kells

    What size print bed should I look for?

    I have worked on and almost finished probably 5 portables over a few years but I have barely put one(deadass built it out of glued together legos lmao) together as I can never figure out the case. I'm looking for a cheaper 3d printer that I can afford but I don't know how big a print bed I...
  7. The Next Guy

    The Super Pi

    So over the last 2 weeks, I've been working on a project using the Raspberry Pi 3 as a portable gaming device. (Very original huh?) I made an attempt with it before using some really silly stuff inside of it: A USB SNES Controller, 18560s, RPI default audio... and so on. The final case thickness...
  8. Question Looking to start making a Vita dock, need electronics advice.

    Note before starting, I have very little knowledge of electronics, good knowledge of 3D modeling, and limited programming experience. I'm looking to design and 3D print a dock for the PS Vita that has a Raspberry Pi 3 B+ to output video. This has been done before, but I want to also add a...
  9. Aero_Knight

    Worklog Portable Genesis "PG" (ATGames Moddification)

    ORIGINAL CONSOLE: SEGA Genesis Base Product: ATGames SEGA Genesis Classic Game Console (Kohls Release 2016) Base Components: ATGames Console, 2 IR Basic Genesis Controllers Base Price: $49.99 (2018) Overall Goal: Portablize the ATGames SEGA Genesis Classic Console using as much base hardware...
  10. nobble

    Discussion Nobble's Adventures in 3D Printing (Creality OR Cfiction?)

    Hey BB! As some of you know from Discord, I jumped on the Creality Ender-3 bandwagon recently. Since purchasing my printer(s) I have done the following upgrades to one of them: Installed Anycube Ultrabase Glass bed (Don't buy this, it is a bit to small to fit the entire footprint of the bed...
  11. Koksi_90

    Worklog PK 64

    I would like to introduce you today a second N64 portable (the first was so awful that I would not put it here: D) It was my first 3d drawing and first 3d print I just bought a 3d printer (Prusa MK3). Now the portablize addiction has grabbed me and I'm just at the WII This Forum is so awesome...
  12. Madmorda

    Model Hoenn Region National Pokedex Gameboy

    These are the files for the Hoenn Region National Pokedex that I am building for the Hack Like Heck contest. I am using this to house a Raspberry Pi 3 with a 3.5" screen, but I have intentionally left out any screwposts for the pi and used very generic parts for all of the ports. The idea behind...
  13. Fruity_Grebbles

    Model Mini-Keyboard Mounting Solution

    It has come to my attention that I still have a lot of keyboards. The only reasonable explanation I have come up with (considering how amazing these keyboards are) is that people are discouraged to order keyboards and use them for lack of a good, reproducible mounting solution. @Luke had a...
  14. Fruity_Grebbles

    Free design service

    Anyone's portable need a case? I'm practicing my CAD skills. Hit me up with your ideas. I'll do the first 3 requested.
  15. Madmorda

    Custom Gameboys

    Hey guys :) I'm going to put these up on eBay soon, but I'm putting them here first in case anyone is interested. All of these work great, are clean, and have brand new faceplates. All paint has been clear coated, and they should last a long time if taken care of. The gameboy colors: both of...