Search results

  1. Crazzyleprechaun

    Modern Piiwii Pocket

    Yeah I was thinking of going back and tidying up the wires. Unfortunately the internals are pretty sensitive so it will be difficult but I definitely will one of these days. Thanks man it means a lot, its such a great form factor and fun build! I'm glad I had the opportunity to make one
  2. Crazzyleprechaun

    Modern Piiwii Pocket

    I built my own PiiWii Pocket! Features: Trimmed Wii All 4 Layer Tech boards PMS, GC+, UAMP Bluetooth module and built in Sensor bar Front face volume buttons and Sync 640x480 3.5 inch IPS Display Direct Drive External USB ports, Headphone jack and Barrel jack for charging Dual tact...
  3. Crazzyleprechaun

    Worklog Wii U R&D Thread (WURD)

    I cannot wait to try this! I've been stumped with progress on my Wii U and I've been wanting to get back into it and this is just what I needed. Thank you for all your hard work!
  4. Crazzyleprechaun

    GameCube JoyCon CAD Files

    Thank you for uploading it!
  5. Crazzyleprechaun

    GameCube JoyCon CAD Files

    Hey so I am interested in building one of these but I noticed for the STL files you uploaded Wavecon_L_Front was just the back half I was wondering if you could reupload the files.
  6. Crazzyleprechaun

    Worklog Modernish PiiWii Pocket

    Hey all this is my last update before I make a cutting edge post and I just wanted to post the final internals for this. They're a little messy but I think its the best I'll get since everything is just smooshed together in this anyways. . I was able to get it to almost close but I think...
  7. Crazzyleprechaun

    Clear Ashida Portable

    It’s from PCB Ways 3D printing services. Its UTR 8100 transparent resin
  8. Crazzyleprechaun

    Worklog Modernish PiiWii Pocket

    Thanks to the help of YveltalGriffin and Aurelio for allowing the direct drive to work with 640x480 screens I was able to fix the aspect ratio. I was able to clean up the wire mess a little but its still not where I want it to be right now. It'll probably take me a while but here's how it...
  9. Crazzyleprechaun

    Worklog Modernish PiiWii Pocket

    To be honest I definitely was overlooking this. I didn't change the resolution at all and I was hoping there would be changes via RVLoader. As you can see on the left there is a black bar offsetting the screen in the images with the DD.
  10. Crazzyleprechaun

    Worklog Modernish PiiWii Pocket

    More progress I started securing things in the back half of the case which is just a giant mess of wires. I added a charge jack, headphone jack (below the charge jack) and the USB ports trying to keep everything organized. Then I moved on to add the Wii into the back half of the case and made...
  11. Crazzyleprechaun

    Worklog Modernish PiiWii Pocket

    Crazzyleprechaun's Pii Wii Pocket Worklog I've been wanting to finish this portable for so long but unfortunately time and lack of skills wasn't on my side when I attempted to build this in 2017 (I think that's when I started). Either way I have revisited this project many time in the past and...
  12. Crazzyleprechaun

    Worklog Wii U R&D Thread (WURD)

    This is amazing I can’t believe you finally did it. Never thought I’d see the Wii U that small. Seriously great work!
  13. Crazzyleprechaun

    Discussion Ashida & G-Boy injection moulded shell expression of interest

    I would be interested in transparent blue GBoy and Gamecube Indigo Ashida
  14. Crazzyleprechaun

    Worklog Wii U R&D Thread (WURD)

    I’m mostly trying to test what is capable of being relocated with just the stock U. Currently what is possible is Relocated: Bluetooth, eMMC (SD card replacement), 5v Reg, 3v3 Reg, 1.2V Reg Untested (To my knowledge) But Possible: Wifi Module, SLC Nand, Smc Failed (From my testing): Gamepad...
  15. Crazzyleprechaun

    Worklog Wii U R&D Thread (WURD)

    Just wanted to post another update on my progress before I forget First off I decided to switch to a different U motherboard for now because the other one I have can't test games for now since the gamepad module isn't working at this point. I wanted to test to see if it was possible to fully...
  16. Crazzyleprechaun

    Worklog Wii U R&D Thread (WURD)

    Over the past couple of weeks I decided to start working on the Wii U as I've been interested in portablizing developments on this console for some time now and I made some good progress on it. First thanks to the help of YveltalGriffin in previous postings I was able to successfully relocate...
  17. Crazzyleprechaun

    Clear Ashida Portable

    I completed another transparent Ashida this time in yellow. This one has a lot of cool features and it was a pretty difficult build and the first time I've ever included WiFi in a portable. The yellow looks really nice in person and I'm happy with how it turned out. Features: Original Gamecube...
  18. Crazzyleprechaun

    Clear Ashida Portable

    I didn't have trouble at the time but parts tend to go in and out of stock. They will most likely be available soon and the Ashida requires them for the build so there aren't any alternatives.
  19. Crazzyleprechaun

    Clear Ashida Portable

    Hey guys I completed this fully clear Ashida build and I thought I'd share it since I really like the look of it. I used resin casted GameCube buttons and tried to keep the internals as clean as possible. The Ashida is such a fun build with all the streamline 4Layer Tech boards and the form...
Top