Search results

Nice! I‘ll maybe update the board for that new hole diameter. Thanks :) Worklog soon? ;)

Wow amazing work! Congrats! I’m really hyped to see how this will turn out! ;) Thanks for supporting my design! <3

Yeah I had to reset GC+ and calibrate the sticks every time I wanted to play. Hmm I used a GameCube controller cable, so I don’t think it was a battery issue or something. Even if I disconnected the left stick and plugging back in it was going crazy the exact same way. I don’t know why only the...

Cool! That’s weird those didn’t work for me :( As soon as I turned the portable off and on again, left stick was going crazy. Normal sticks don’t do that for some reason :rothink:

Amazing work! ;)

Hey! Yeah you’re right, practically everything comes from AliExpress. I‘m entirely lost with those stories of tariffs honestly, they literally change everyday… I thought they were off for 90 days though :rothink: You can find some articles in the US as well, but I don’t think you can find...

Hi Jscnell! It's kinda hard to see from the picture, but I think you didn't plug the GC+ 2.0 to the correct via on the Wii motherboard. If you refer to this picture on the definitive Wii Trimming Guide, you can see that your GC+ is wired to Controller 2, which cannot be used in the RVLoader's...

Hey! Ohhh they started again :\ I didn’t have any of those issues. For the Xii-Flex, answer them by saying “a friend ordered one without issues” by specifying that order number: Y18-8253737A For the Main PCB, it’s weird, I didn’t change anything. I guess you can accept the hole at 0.8mm…...

Hello there! Just finished building your Xii-Boy Ultra portable? It deserves the spotlight! These stands make it shine! I just added those Xii-Boy Ultra stands on the GitHub and on my Printables account! Stand on the right is compatible with the XiiSBar. You can just clip it in its slot...

Hey all! It's time for a new release: the USB-GC2! A Xenii and Supertazon collaboration 2024-2025. The USB-GC2 is a next-gen GameCube Power Board that makes the console compatible with USB-C Power Delivery charger. This revision 2 is now open source and supports both 12V and 15V Chargers...

Hi Hili! Thanks for making a XB3! Yikes you’re right, sorry for the mistake. It has been updated. Thanks! I also added the materials, it makes things a little bit clearer. Thanks for have letting me know. Have a nice day!

Hi all! I guess it's time: After 7 long months of work, I'm finally ready to release the Xii-Boy Ultra, in its BETA revision. This project has been a huge challenge. It was extremely hard and exhausting, but it's finally done. I'm extremely proud of the result and really happy to announce...

Hello everyone! It's with joy that I celebrate with you the first anniversary of the original Xii-Boy! :) This design is my beginning in the community, and I just wanted to thank everybody again for the help and the support you gave me over the last year. I hope the next ones will be even...

Hi everybody! You probably waited it a lot; Welcome to this final episode #7 of the Xii-Boy Ultra's worklog! I spent literally every hour of free time I had in that project, and I'm here to show the first Xii-Boy 3 done! Have fun reading! :) A few days after last episode, I quickly tested the...

Thanks! I’m using SN42BI58 solder paste from Aliexpress. I like it because it has a really low melting temperature (128C). It’s sometimes not optimal because some circuit can reach those temperatures which could break the solder. I like using it because my hot air station isn’t powerful at...

Hey there! It was time: Welcome to the episode #6! I have some crazy progress to show you, I hope you'll like this episode! A few days after the last post, I received everything I needed to continue this project! However, itt was only missing one thing: the 4LayerTech stuff. It was clearly the...

Hey! Yeah the main difference is the screen tolerances. I made some updates about it recently but I haven’t uploaded the new files yet. If you order your case in Nylon or Resin, JLC version is needed. Otherwise, just use FDM. There are some mistakes. Here is a list: - XiiSBar PCB isn’t needed...

Cool! I suggest you checking my worklog / thread to see the boards you have to assemble. XB2 is pretty cheap, so it could be perfect for your needs! Don’t hesitate to contact me if you need further informations ;) XB2’s presentation thread here...

Hi, Xii-Boy Pocket costs around 250 CHF so pretty much in your budget. However, you must know how to solder. You have a lot of PCBs to assemble, and they might be tricky if you don’t have a some soldering knowledge. You could also wait for some maybe upcoming Xii-Boy Ultra kits. They will be...

I haven’t thought about that. It’s definitely a good idea, we’ll see how we can implement it!