Search results

Hello everyone, I am here to list my currently unfinished Ashida. Last summer I successfully got it up and running and it was working great until I decided to upgrade to the RVL-DD (image quality on that thing is fantastic btw, shoutout to Aurelio) and I botched the install. The issues it is...

Twisting with ground and rerouting helped significantly. The new LCD driver bit Aurelio is working on seems to be fixing the RVLoader crashes which is good. Ill try to keep looking at it, really not sure what the hell is going on or if i damaged something on the wii itself. Might have to wait...

I did try to apply some pressure on the flex and do just that and i think I got it pretty good, idk what's happening now but i am sad lol

I fixed the green bars and screen jumping and fade to black issue, there was an absolutely minuscule ball of solder that attached itself somewhere between pins 3 and 7 on the AVE and bridged it. screen looks great now, i did go back to my old i2c set up (untwisted magnet wire from RVL-AMP to PMS...

So quick update, I resoldered the DD to the flex as well as completely resoldering the flex to the corresponding vias on the wii and managed to stabilize the image temporarily. On subsequent boots however, i began to have slight green tint flickering across the screen every other second or so...

Alright I have been in the discord a bit trying to troubleshoot but figured I would post here. I finished my Ashida last summer and it was in excellent working order (shout out to Stitches and Crazy Gadget and everyone else). I decided to upgrade to an RVL-DD over the blue driver board but it...

Sorry for the really late reply, I hope you were able to fix up yours but for record's sake, i fixed the audio issues by shortening the MC, D, C and WS wires, twisting MC with ground and then wiring them over the wii and it worked great. Only issue is if i want to get to the underside of the wii...

ooo that's a good call, okay I will try that! thanks!

I did! I just dont know how to set it without getting to the wii home menu lol

So update! I now have a working and fully functional Ashida, fan, LED, audio, video, bluetooth, MX chip and buttons are all working wonderfully and it boots consistently everytime. I did end up wiring the audio lines over the wii because I could not route them away from the voltage lines the...

Okay sounds good I'll try it, thanks!

Oh yeah, I fixed that earlier today

So I shortened all the audio lines and reattached them and now I have a new problem. The fan, the LED and the screen all turn on and the wii gets hot so I assume there is power but nothing shows up on screen it is just black. No rvloader, not boot error message nothing. All the video lines are...

Yeah I probably can, I just switched the MC wire from a 34awg magnet wire twist with 34 awg gnd wire to a wifi shielded wire from the wii and I am still getting only static. Do you think shortening would help? or tacton taping the audio lines together to help shielding?

I believe so? I am using an RVLamp and I wired SDW and SCW to pms, ashida board and wii and wired MC twisted with ground, D, C, and WS from ashida board directly to the corresponding vias on the wii. Audio is staticy (only static really) on headphones and speakers, volume control works fine and...

I figured it out, the fan min speed in RVLoader was too low

So I got the wii to work and RVloader and all controls work!!! However, I have not tested audio yet and the fan only stays on for a second and then cuts out and makes a clicking sound like it is trying to move but it won't. Does anyone have any ideas? The fan ran fine when the wii wasnt hooked...

And thank you @Stitches , that was exactly the issue

Okay so I have wired everything up, shout out to @CrazyGadget for help getting my trim to work and the relocations. Everything is together, I turned it on with just the batteries and fan and the fan turned on and stayed on which was cool. After wiring up everything, I attempted to turn things on...

I have trimmed the third wii, defiinitely a short somewhere because resistance check is giving 0