Search results

Unfortunately more issues keep coming up. Now the sliders are stuck for some reason. Any methods to get it smoother? I’ve tried cleaning it with ipa, and prevented flux from getting on it too. edit: the triggers seem to be working fine now, but of course more issues have risen. For some...

Thanks for the responses. I used a different charger and it works fine.

I rewired everything, including using tighter USB wires. I also swapped the SD card, but the problems are still there. Do you think it has to do with the PMS Lite? I can try replacing that. I also saw some stuff online that some chargers have grounding issues so I gonna try a different charger.

I confirmed continuity is good and even swapped the pd 3 with another one I had. I still have the same issues with the crashes once the charger is plugged in. Open to any suggestions.

For some reason, the Ashida I’m working on will sometimes not boot into rvloader(stuck on blue vga screen), or crash after a random amount of time. I noticed this happens whenever I have the charger plugged in or when I plug in the charger once in Rvloader. Another’s thing is that the power...

I recently got two 3d printed cases from PCBWay, but there’s kinda a problem. It seems the back half of the Ashida is too long because the screw posts don’t line up with the front. It’s kinda hard to capture, but trust me, both don’t fit. To make things worse, there’s already a portable in...

Sorry for the double post(just wanted it to appear on "What's new"). I tried using a link to get to the dual tact switches on electron sheperd, but it doesn't work anymore. I'm wondering if these...

Now that I look at the board, I see it so clearly:facepalm: Thank you

I've been looking into building Dustin's g-boy design for a while. Doesn't seem to be a problem for everyone else, but I can't find the specific LED used in his design. Could someone please post the link? Thanks

Normally around 4 hours

Yes, you can use any 4 layer wii.

The definitive wii trimming guide has a diagram for wiring video and more. https://bitbuilt.net/forums/index.php?threads/the-definitive-wii-trimming-guide.198/ Just match the points on the wii to the silkscreen on the screen.

You will need to switch the screen from composite to vga. You can add a button to the source pad and press until the little box says vga. Also, the motherboard could use a little clean up. Another thing is I’m not sure if you’ve connected the mode pin to 3.3v but you gotta do that to make it...

By power do you mean u10, the LDO, or something else?

I was looking for a barrel jack and power supply that are compatible with the Wii micro design, but couldn't find anything that would fit or was in stock. I was wondering if someone could tell me where they got their parts or supply a link. Thanks

I’d be interested in a couple orange spice Ashida shell, and a red g-boy shell as well.

Try wiring composite and make sure your u10 is solid. Also make sure to clean near the scw and sdw pads on the pms and everything else in general.

If that doesn’t work, try downloading the Rvloader files again.

Cleaning up those joints in the red, or moving them to the components might help. Probably not the issue, but worth a shot.

I'm pretty sure Noah took them with him when he retired.