Search results

Cause problems? M8 it'll prevent problems. OMEGA trims are notoriously difficult to get and keep functional. OMGWTF all the way for first timers. As for buying a trim, you absolutely can just buy one if you want. They're usually fine and dandy, but if there is a pre-existing problem with the...

Chosen One spotted

That's odd, the Sandisk usually works. You might have been unlucky again, or there could have been a hardware revision when they changed the product to USB 3.2 that has affected its compatibility. We've only previously tested the 3.1 version. Have you checked that your Wii is updated to 4.3...

cfc lives in The Philippines . I don't think small claims can do international suits, and even if it could, it'd take ages and the expense wouldn't be worth it. I've messaged him to ask wtf is going on. Sadly the most we're able to do if it turns out that he has cheated you is to ban him and...

If it's stupid but it works, it ain't stupid!

You have my interest

It'll be $700 dollarydoos in Australia and we don't have any bullshit tarrifs. Shipping from China is a hop and a skip, it shouldn't be so high for us. If any discounts arise I'll probably end up picking one up so I can play not-Bloodborne 2, but it's definitely a bad move that indicates that...

Love seeing these recreation projects! Great way to salvage damaged and corroded systems and make some tidy functional units out of them

The Samsung Fit Plus series of USB drives was known to be funky with BBLoader. RVLoader is an evolution of BBLoader, so that funk may have carried over. The common issues with it were games crashing and random file corruptions, so it's possible that you are unlucky and bought one that doesn't...

Well done with the cleanup! That's much better, and safer. With that done we can rule out a short between PMS pads, but the 5V rail behaviour is still strange. I'm not sure how to troubleshoot that, but if shorting 5v to the fan pad works then I suppose that's what you might have to do to avoid...

Excellent. Remember to clean any blackened flux off the boards with isopropyl alcohol and a soft bristled toothbrush afterwards. The "no-clean" title only refers to the substance not causing erosion or rusting if left on a PCB, it still needs to be cleaned off if it goes dark from being burnt or...

Good heavens man......................... you need to take the batteries out and shorten those lengths of exposed wire. No wonder things keep dying, you have a nightmare of voltage shorts just sitting waiting for the case to close and press one of them into a neighbour, and some of them are...

That is very strange. The Fan headers have their own customisable voltage to control fan behaviour and shouldn't really be shorted to the 5v rail. Can you provide a clear photo os your PMS wiring?

65w is the maximum amount of power the charger can supply, it doesn't force the device to accept that much. Any USB-C device will only draw as much power from the PD supply as it needs, up to the maximum. Unless your charger is faulty, that wouldn't be the cause. If your 5V line is that low, it...

You can use any PD compliant charger, the PMS will only draw what it needs.

That isn't going to solve your display issue. VGA uses the same colour lines as component video. If there's an issue with one of the lines still (which it sounds like there is), it will affect VGA the same way

Excellent to see this finished!

That's a link to the forum index

As long as the chips shown within the trim line diagram are retained, I believe yes it should work. I'd ask @Gman to be sure though, the PS2 isn't my best area of expertise

It'd be a chonky build, but yeah this is what people used to do before the 7900X trim was available.